









NEIKO 01150A SAE and Metric Hex Bit Socket Set | 20 Pieces | SAE 1/8” – 3/8” | Metric 3mm – 10mm | Two Socket Adapters 1/4 and 3/8” Drive | Industrial S2 Steel Bits | Heavy Duty Cr-V Sockets
-
Dan Pointer
> 24 hourExtensive sets like this are very hard to find and this one has worked well for me so far. Ive been using this with a small impact driver and have had no issues (I thought they might break easily, but not so far). The socket sizes are small enough to fit deep bolt wells while some other brands are not. Every tradesman should have a set of these.
-
Michael P Raffaelli
> 24 hourHave not had occasion to use them yet but they look to be Heavy Duty
-
Chelsea Johnson
> 24 hourThx for the convience
-
Haqq Khan
> 24 hourI had multiple sockets break off on me after 2nd or 3rd use. No way to really warranty them out. I would stick with a brick mortar place where you can just walk in and warranty the socket out.
-
Simple Man
> 24 hourNice quality.
-
mIke L.
> 24 hourNice set of hex sockets. Case is good but i can see the plastic latches wearing out soon. Overall im happy with the product
-
matthew gaul
> 24 hourBroke a small one, but use them every day and none have came apart and every size is included
-
Kevin
> 24 hourSockets are sturdy but case is not
-
Thumaro
> 24 hourGood for occasional use.
-
Corey T. Renner
> 24 hourSome of them are good, some are not sized correctly. 5/16 is supposed to measure 0.312 across the flats, 8mm is supposed to measure 0.315 across the flats. In this set both of those sizes measure exactly the same 0.308 across the flats. Snap-On hex bits measure correctly (.312 & .315 respectively), and before you say Yeah, but thats Snap-On and they cost a fortune, which is true, Ill point out that Harbor Freight which is basically the cheapest stuff you can buy ALSO measures correctly, yet these dont. On my first use, this set stripped out two 8mm drain plugs which cost $32 and considerable effort to replace. That money would have been much better spent buying a better set of hex bits. Would they have stripped anyway? Maybe, they were very tight, but poor-fitting tools certainly didnt help.