This review is for NIIMBOT D110 Label Maker. UPDATE 26 March 2023 When I first tried to download the Niimbot App onto my Dell PC it said that the app requires a 64 bit machine. I was trying to download it on a 32 bit machine. My other Dell office PC is 64 bit but I needed to buy a Bluetooth USB adapter which just arrived. So I was able to download the app and I just paired the label maker with my PC. Problem is that the app wont run Windows 10 for model D110; only runs with the B21 Niimbot label maker. I was really hoping to use my PC to print the labels since full size keyboard is much easier to type on than a cell phone screen. Changing my rating to 3 stars. I own a Brother P-Touch Label Maker. It accepts tape widths from ¼” to 1”. I got this Niimbot label maker kind of on a whim thinking there would be times when printing pre-sized labels might make more sense than using the Brother. The Brother wastes 1 inch of tape each time it prints out (because of the distance between the print head and the cutter). The Niimbot labels are separated by only about 1/8” so the waste factor for them is much less than for the Brother. The Niimbot D110 paired up easily with the Bluetooth of my Android Motorola Moto-G stylus phone and my Samsung S7 Active Phone. From within the app press “connect” and power up the printer to pair the printer to your phone. In order to download the Niimbot app to Windows PC you need a 64 bit machine. The Niimbot app is fine and icons are pretty straightforward to understand. You do need to make sure that the printed image you are shooting for aligns correctly within the height/width label outline shown on the app. If it’s off you can click and drag the image to the desired location within the label outline. Under English there is a generous collection of free fonts. Any font that has “VIP” next to it requires signing into a paid account. This D110 label maker will accept labels ranging from 12 to 15 mm high and 30 to 75 mm wide. Roll of OEM labels seems to range in price from about $5 per roll (if purchased in bulk) to about $12 for single-roll purchase. Phomemo D30 labels will fit the D110 label maker and are cheaper then the Niimbot brand. Phomemo are ~$4 per roll if bought in bulk rolls or 3. Problem is that the Phomemo are wrapped opposite to the Niimbot so you would have to unwind the Phomemo roll and rewind in the correct direction. Just for reference, ½” tapes for my Brother printer are about $3 each (3rd party). Each roll has a RFID chip embedded on the side of the roll that identifies the dimensions of the label. I’m assuming that the chip on the Phomemo can be read by the D110 printer. If not, at worse, you would need to peel off the side label with the RFID chip and attach it to the Phomemo roll. As of this writing the Niimbot D110 is selling on Amazon for $37. Same unit sold by JADENS store is selling for $30. And the Niimbot D110 is also available on Niimbotlabel.com for $30.80 (incl shipping).This Review is for Geek Cheers Flag Pole Holder, Multi-Positions Flag Bracket Heavy Duty T304 Stainless. This is a heavy duty flag pole holder. My current flag is hanging from an exterior wall at the typical 45 degree angle. I would prefer to have it hang horizontally but that is not an option with my current holder. This Geek Cheers holder will let me set any angle I want from zero degrees to 90 Degrees. The Amazon write-up and the box say that the material is cast 304 stainless steel but the holder and the screws and wingnuts are mildly magnetic so I suspect the material is likely a 400 series stainless steel. But since the holder is also painted (white) I don’t foresee a long term rust problem. I love that they include a 4 mm brad drill bit to drill pilot holes for the four included 2-1/2” long screws. They also include screw anchors should you opt to secure the holder that way. Note: the base of the holder is designed such that you could mount it to a round column. Giving 4 star rating because of the stainless steel issue.

I received this from the Amazon Vine program and am leaving my review voluntarily. I wanted this to use around the house - in the kitchen/craft room and pantry. I tried over and over to get the printing to line up but each time it printed off center. After 10 times, I gave up. At $45.99 its overpriced and Ive seen less expensive and easier to use models from the box store.

I like the ease of setup and use of this label printer. I was able to get it going in about 10 minutes.The directions were easy to follow. The quality of the printed label is great. I would recommend this label printer for the ease of use and the quality

Installation and configuration with the free NIMBOT Android app on my phone was easy enough. The included labels were smaller than I would have preferred but were quite readable as you can see in my photo. I ordered a roll of longer labels from Amazon for about twelve bucks. Its portable, convenient, simple to use and runs on its internal rechargeable battery. I found nothing to dislike.

This printer is so easy to use. Set up was basically automatic after installing the app. There are a few different font to choose from and also has the capability to print in a rounded layout. The labels that came with it are shiny so you have to wait a few before touching it so the ink sets.

Easy to use, prints fast. You can even upload pics to the labels for really customized printing. It comes with everything you need to get started in the box. No need to worry about ink either.

Couldn’t wait to use this but then saw that the labels were very small, and I also had to download an app for it to work. The company is based in China and it states in the terms of use agreement that any data collected can be requested by the government. I don’t feel comfortable with that so I’m choosing not to use the app, therefore making the label maker useless to me.

It didn’t print for me at all like it is pictured. I saw other reviews where it worked perfectly, but mine is not. Maybe I am doing something wrong, I don’t know. It’s just how it works right out of the box. I’m disappointed.

Really good label maker prints clearly just download the app it’s easy as 123 type whatever you want to print and it comes out perfectly.

This label maker can be paired to s mobile app in seconds and be up and running. Unlike the costly and hard to use professional label makers all the print setup is done in the mobile app. It is easy to select text font, size, and pattern. My wide printed 40 labels for all kitchen spice jars in less than 20mins and also stuck them on the jars in that time. Just apt for home hobby projects. I should mention the label and ink are not very durable as the ink can tend to fade if exposed to heat and moisture for an extended period of time one of the jars after coming out of the dishwasher had its label faded.