Noctua NF-A4x20 5V PWM, Premium Quiet Fan, 4-Pin, 5V Version (40x20mm, Brown)

(1375 Reviews)

Price
$8.97

Quantity
(10000 available )

Total Price
Share
62 Ratings
53
3
1
4
1
Reviews
  • Samuel

    > 3 day

    Its quiet and blows, it goes great in my 1u server.

  • S. G.

    Greater than one week

    This 40x20mm fan fits Waveshare case for Nvidia Jetson Nano, 4-pin connector fits the board too. Software controlled. Well made and whisper quiet.

  • Luke

    > 3 day

    Bought to replace noisy fans in a 1U unifi router enclosure. These are noisier, though theyre also much higher CFM.

  • Yingnan Wang

    > 3 day

    I use M2.5 screw and M2.5 nut as washer.

  • Skyler

    08-06-2025

    noctua needs to fix the issue with 5v not being compatible with 12v pin headers.

  • joe thomas

    > 3 day

    I should have click the buy button on the two(2) fans package from a different maker for roughly the same price. You are paying more marketing , and silly fold out displays, tons of fancy packaging, it come packed in alot of plastic which could be cardboard, three sets of oddball extra cables just throw 50% of the package contents in the trash. I am using this on a jetson nano and it sounds a performs the same as the stock one. I used thin guage wire to attach the fan and just twisted it to sung it down. All the connectectors that cam with it i just tossed the the trash.

  • Uncle

    > 3 day

    I was blow away by the quality of this fan. The details, the material feels like it will last a really long time. You can tell people did lots of research.

  • Noah

    > 3 day

    I bought this for my NVidia Jetson Nano because it was recommended by the Geekworm case I bought.

  • Mack L

    > 3 day

    Installed easily with screws I had laying around. Turns on when its needed and off when its not. The only complaint is the rubber corners on the top of the fan eventually rubbed off and one day one of them jammed the fan blade up and almost overheated my nano. But I took the rest off and its fine now.

  • cm

    > 3 day

    Great cooling fan and so quiet.

NF-A4x20 5V PWM headerNF-A4x20 5V PWM header

Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and an AAO frame, the NF-A4x20 5V PWM is a PWM enabled 5V variant of Noctua’s highly optimised, premium quality quiet 40x20mm fan. The custom designed NE-FD3 PWM IC that integrates Smooth Commutation Drive technology and Noctua’s reference class SSO2 bearings assure superb running smoothness and excellent long-term stability. Topped off with modular cabling and the OmniJoin Adaptor Set, the NF-A4x20 5V PWM is a premium choice for demanding 5V applications that require PWM control.

NF-A4x20 5V PWMNF-A4x20 5V PWM

5V PWM version

Many devices such as network or storage solutions use 5 volt 40mm fans with PWM speed control. With the same operating voltage, PWM support and the included OmniJoin adaptor set that makes it compatible with proprietary fan headers, the NF-A4x20 5V PWM is ideal for replacing noisy or broken 5V 40mm fans with PWM.

Please Note: Being a 5V fan, the NF-A4x20 5V PWM cannot be run at 12V and will be damaged when used with typical 12V power sources such as PC motherboard fan headers.

NF-A4x20 FACNF-A4x20 FAC

SSO2SSO2

NF-A4x20 AVPNF-A4x20 AVP

NF-A4x20 5V PWM scopeNF-A4x20 5V PWM scope

Flow Acceleration Channels

The NF-A4x20 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.

SSO2 Bearing

The NF-A4x20 features the further optimised second generation of Noctua"s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.

Integrated Anti-Vibration Pads

Integrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.

Scope of delivery

  • NA-YC1 4-pin PWM y-cable
  • NA-EC1 30cm extension cable
  • OmniJoin adaptor set
  • 4x NA-AV3 anti-vibration mounts
  • Fan screws
NF-A4x20 5V bannerNF-A4x20 5V banner

Please Note:

Being a 5V fan, the NF-A4x20 5V PWM cannot be run at 12V and will be damaged when used with typical 12V power sources such as PC motherboard fan headers.

NF-A4x20 PWM table NF-A4x20 FLX table NF-A4x20 5V PWM table NF-A4x20 5V table
NF-A4x20 PWM NF-A4x20 FLX NF-A4x20 5V PWM NF-A4x20 5V
Connector 4-pin PWM 3-pin 4-pin PWM 3-pin
Voltage 12V 12V 5V 5V
RPM Max: 5000 / Min: 1200 5000 Max: 5000 / Min: 1100 5000
RPM with L.N.A. 4400 4400 - -
RPM with U.L.N.A. - 3700 - -
Acoustical Noise 14,9 dB(A) 14,9 dB(A) 14,9 dB(A) 14,9 dB(A)
Acoustical Noise with L.N.A. 12,2 dB(A) 12,2 dB(A) - -
Acoustical Noise with U.L.N.A. - 8,5 dB(A) - -
Size 40x40x20 mm 40x40x20 mm 40x40x20 mm 40x40x20 mm
Colour Brown & Beige Brown & Beige Brown & Beige Brown & Beige

Related products

Shop
( 2371 Reviews )
Top Selling Products