Noctua NF-A8 PWM, Premium Quiet Fan, 4-Pin (80mm, Brown)

(0 reviews)

Price
$14.24

Quantity
(10000 available )

Total Price
Share
343 Ratings
305
17
9
7
5
Reviews
  • Lucki

    > 24 hour

    Obviously these are so much better than the stock Nidec fans in this SuperMicro JBOD. Knocked off a couple stars because I had to modify the hot swap cartridge (Its build for 36mm and these are 25mm, there arent thicker ones available that I could find). I also had to grind off one of the keying pins on the 4 pin plug. It was keyed for a 3 pin slot, but the existing plugs will only take a plug with the tabs all the way at the end. From the last picture you can see that the Noctua doesnt have the top pins that let the cartridge cleanly unplug the fan, so if I pull these I have to remember to hold the cable as well.

  • GW

    > 24 hour

    Great quality at a fair price!!

  • Paul

    > 24 hour

    I used this fan to replace the stock fan in my Icom IC-7300, which was quite loud during transmit. The Noctura fan is essentially silent. I cant hear it at all. If youre looking for a quiet fan, look no more, this is the one.

  • phil moulton

    > 24 hour

    ordered 3 fans to replace the ones in my battery backup.... all i hear is air noise..

  • AntJustAnt

    > 24 hour

    Fit perfectly in an older Dell 790 SFF. Less noisy than the stock fan. Seems to be keeping things cool. Had to use with a Pocaton 5Pin Female to 4Pin Male Socket Connector Jack PWM Cooling Fan Power Cable Compatible with DELL PC in order to connect to the motherboard.

  • Andrew T

    > 24 hour

    Noctua is known for their low volume and high airflow, and now I see why. Great fans.

  • Mike Meehan

    > 24 hour

    Great packaging. All needed mounting hardware. Extension cables and splinter cables if needed for installation. Would buy again.

  • S. Ellington

    > 24 hour

    Fan is so quiet its almost dangerous!

  • Richard

    > 24 hour

    Well made quiet easy to install. You can’t go wrong with this brand.

  • D. Folk

    > 24 hour

    Fans are very quiet. The only fan I have left to replace is the power supply fan. It is the loudest.

NF-A8 PWM headerNF-A8 PWM header

The NF-A8 is a highly optimised, premium quality quiet 80mm fan. Featuring Noctua’s AAO (Advanced Acoustic Optimisation) frame as well as sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A8 further improves the renowned quiet cooling performance of the award-winning NF-R8. The PWM version sports Noctua’s custom designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise-Adaptor to reduce the maximum speed during PWM control from 2200 to 1750rpm. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands.

NF-A8NF-A8

AAO frame

Noctua"s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua"s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan"s performance/noise efficiency.

NF-A8 FACNF-A8 FAC

SSO2SSO2

NF-A8 AVPNF-A8 AVP

NF-A8 PWM scopeNF-A8 PWM scope

Flow Acceleration Channels

The NF-A8 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.

SSO2 bearing

The NF-A8 features the further optimised second generation of Noctua"s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.

Integrated anti-vibration pads

Integrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.

Scope of delivery

  • Low-Noise Adaptor (L.N.A)
  • NA-YC1 4-pin PWM y-cable
  • NA-EC1 30cm extension cable
  • 4x NA-AV1 anti-vibration mounts
  • Fan screws
NF-A8NF-A8

Inner Surface Microstructures

With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.

NF-A8 PWM table NF-A8 FLX table NF-A8 ULN table NF-A8 5V table NF-A8 5V table NF-A8 PWM chromax.black.swap table
NF-A8 PWM NF-A8 FLX NF-A8 ULN NF-A8 5V PWM NF-A8 5V NF-A8 PWM chromax.black.swap
Connector 4-pin PWM 3-pin 3-pin 4-pin PWM 3-pin 4-pin PWM
Voltage 12V 12V 12V 5V 5V 12V
RPM Max: 2200 / Min: 450 2000 1400 Max: 2200 / Min: 450 2200 Max: 2200 / Min: 450
RPM with L.N.A. 1750 1650 1100 - - -
RPM with U.L.N.A. - 1200 - - - -
Acoustical Noise 17,7 dB(A) 16,1 dB(A) 10,4 dB(A) 17,7 dB(A) 17,7 dB(A) 17,7 dB(A)
Acoustical Noise with L.N.A. 13,8 dB(A) 12,9 dB(A) 6,5 dB(A) - - -
Acoustical Noise with U.L.N.A. - 7,9 dB(A) - - - -
Size 80x80x25 mm 80x80x25 mm 80x80x25 mm 80x80x25 mm 80x80x25 mm 80x80x25 mm
Colour Brown & Beige Brown & Beige Brown & Beige Brown & Beige Brown & Beige Black with swappable coloured anti-vibration pads

Related products

Shop
LCK your love shop
LCK your love shop
( 0 reviews )
Visit Store
Top Selling Products