Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)
-
Kip Kshlerin
> 3 dayEasy to install, keeps 8700k cool with little effort. Fan is pretty quiet on it. Ability to have the fan mount above, below or both is great for tall ram or smaller pc cases
-
Lorronie
> 3 day大抵ＣＰＵ付属のクーラーで済ませているのですが、Ryzen3900Xで８０°Ｃ、ファンもゴーっと鳴ってることから、十数年ぶりにクーラー買いました。マザーボード X470 Master SLI ケース Antec nine hundred グラフィックカード MSI GeForce GTX 1660 Ti AERO で、用途はPremiere等での動画の編集です。 NH-U12Aも考えましたが、ケースの大きさが心配で。 取りつけは思ったよりもずっと簡単でした。 若干４ピン8ピンのケーブルが通り道になってはしまいますが(下側にファンをつけたので）、何とかつながりました。 レンダリング中１２°くらい下がった感じで、まあよいのではないかと思ってます。音はものすごく静かというわけではないように感じますが、このケースなので他のファンの音と混ざっているから・・・少なくても「ごー」ではないので、よいかと思ってます。夏場になるともう少し厳しいのかもしれません。
-
MAMMALHAMMER
> 3 dayAfter switching to this Noctua cooler and Noctua NF-S12A case fans my PC is silent. Not hearing the shifting whine of the stock wraith prism cooler or the motor and bearings of the case fan I had before is worth the money. My temps are fantastic at idle and during a 100% CPU benchmark test. Ryzen 7 2700x.
-
G.E.
> 3 dayFirst Noctua cooler and very easy to install. One recommendation would be to verify if there are any compatibility with motherboard, case and ram. During the installation in Fractal Design Torrent Nano, needed to rotate the cooler 180 degrees BUT cannot install an exhaust fan in the case due to the size of the cooler.
-
Perry D
> 3 dayQuality construction, easy install and very quiet!
-
Razzz
> 3 dayCaught it on sale and replaced a Noctua NH-L9x65 (which moves less air), so the mounting bracket system was the same. Had to remove the fan to access the two hold-down screws then mounted the fan in the upper position (and blowing down). Not sure what the most efficient cooling position is and Noctua instructions did no say but they did note the upper position is the more quiet position besides including two extra fan wire holders if you want to run two fans in both mounting positions (and noted to use the throttle cable on the upper fan in that configuration).
-
paul V
> 3 dayi Love the innovation of the mount style,. I mounted the noctua fan underneath and a 14 inch rgb fan on top , no problems dissapating the 125w tdp of the overclocked i9 with the bonus of dragging fresh air over the VRMs and ram
-
J P.
> 3 dayBig, beefy cooler for my OC needs. Definitely worth the price.
-
David
> 3 dayIt is pricey but doesnt compromise on anything. Super easy installation process and they even include a long screwdriver just in case you dont have one that is long enough. Plenty of clearance for ram and top pcie slot. Also the included fan is awesome: high performance with low noise.
-
Marjory Marquardt
> 3 dayIt was a bit difficult to install in my mid size case but work the effort. It has dropped CPU temp 20 degree C and is almost silent.
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.
|
|
|
|
|
|---|---|---|---|
Low Profile ModeRun with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases. |
High Clearance ModeRun with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height. |
NF-A14 140mm premium fanFeaturing sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14. |
NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds. |
C-Type top-flow design
The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.
Measurements
- Height (without fan): 115 mm
- Width (without fan): 140 mm
- Depth (without fan): 163 mm
- Height (with fan): 115/142 mm
- Width (with fan): 140 mm
- Depth (with fan): 163 mm
- Weight (without fan): 820 g
- Weight (with fan/s): 1015 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 1x NF-A14 PWM premium fan
- Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kit
- Noctua Metal Case-Badge
Socket compatibility
Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5
Related products
