Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)
-
ichigti
> 3 dayケースはクーラーマスターのNR200で5950xに使用していますが、サイドからうまく吸気してくれるのでよく冷えます。
-
Brent Kimball
Greater than one weekWhats to say.
-
luke e.
> 3 daySo Ive had this cooler for a few months now and absolutely no complaints, it tames my ryzen 7 5800x no problem. I have the fan in low profile mode with the fan blowing towards the socket. Ive done multiple tests where Ive had the fan blowing away from the socket and I saw that it will run 5-7 degrees hotter. Definitely recommend for a semi low profile build with a reasonably hot CPU. Installing this was a breeze with the secufirm mounting system, not sure about Intel since AMD is clearly Superior but Im sure its just as easy.
-
Don
> 3 daySolid Cooler for more low profie builds. Cool and quiet low maintenance proposition compared to liquids coolers. As I swtich to this cooler after my H80i losing liquid over time due to evaporation.
-
James Bee
> 3 dayIve always recommended Noctua CPU coolers and fans and have personally installed a LOT of them to great success. The last recording studio workstation built I used this same cooler on an i9-9900k in the low profile configuration in a 3U rack case, it gave years of service nice and quiet - honestly almost silent, which is important in a control room. In fact, that system is still running quietly.
-
Calacien
> 3 dayFirst off, let me say, this cooler is large. Super large.
-
Milo
> 3 dayPut on an Intel i7 11700KF, 125 tdp. Stressing cpu runs at 60C max using 105-110 watts. Normal usage runs 34C to 43C. Idles at 26C. Happy customer, didnt get anything as low or stable using AIO water coolers. Install was easy enough as long as you follow the instructions. Fan is quiet, havent been able to get it to go over 50% yet. Board temp good to, only 26C. Might not be as pretty or cool as the AIOs but Im more into protecting my electronics.
-
Glen C
> 3 dayThis product was the largest CPU cooler that would fit in my case. The dinky 92mm cooler tower that the prebuilt came with would ramp up to 4400rpms to keep the 12700k from cooking itself. The noise was very unpleasant from the recliner 12 feet away. Now that the noise is almost undetectable when the C14s ramps up the fan. Its a pretty cooler also if you mount the fan under the heatsink. 10/10
-
Alex
> 3 dayIts huge and quite. Please prepare a big computer case.
-
Jeffrey Morse
> 3 dayBought this mainly to boost the overclock of an FX-8320E. I was hoping that the top down design would better cool the surrounding motherboard components. The northbridge is actually running a few degrees hotter. My previous cooler was an old 120 mm Xigmatek tower cooler that cost one third what this one does. It cooled just as well and the Scythe fan on it is quieter than the Noctua 140 mm at load. I sort of feel Ive been taken.
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.
|
|
|
|
|
|---|---|---|---|
Low Profile ModeRun with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases. |
High Clearance ModeRun with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height. |
NF-A14 140mm premium fanFeaturing sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14. |
NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds. |
C-Type top-flow design
The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.
Measurements
- Height (without fan): 115 mm
- Width (without fan): 140 mm
- Depth (without fan): 163 mm
- Height (with fan): 115/142 mm
- Width (with fan): 140 mm
- Depth (with fan): 163 mm
- Weight (without fan): 820 g
- Weight (with fan/s): 1015 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 1x NF-A14 PWM premium fan
- Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kit
- Noctua Metal Case-Badge
Socket compatibility
Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5