Noctua NT-H2 10g, Thermal Computer Paste incl. 10 Cleaning Wipes (10g)
-
john
> 24 hourDropped my cpu core temps over 10 degrees Celsius. Definitely would recommend this paste.
-
fawad ahmadi
> 24 hourI use this thermal paste on mostly all of my appliances. From my PS4 to smartphones etc. Would highly recommend it also side note the spread of this thermal paste is quiet instant so you dont need a whole lot
-
Javi
> 24 hourUna pasta térmica muy buena, tiene una densidad para mi gusto perfecta y es un detalle que traiga las toallitas de limpieza para la pasta vieja, de momento y después de un año de uso en procesadores y gráficas no creo que cambie a ninguna otra por que veo que tiene una conductividad térmica mas que adecuada para hacer overclock sin problemas.
-
Olga
> 24 hourCannot think of anything to complain about. The paste is easy to spread and gives good results. In comparison with Kryonaut it wins (Kryonaut is harder to spread and gives worse temps, at least with Noctua coolers). Thanks Noctua for making great products!
-
Mark
> 24 hourUsed for R7 5800X3D; and worked wonderfully, with super fast shipping!
-
Jonathan Whyte
> 24 hourThis is the third paste Ive used on my i9-9900k (OC at 5.0 Ghz @ 1.27v all core no AVX offset) with a 280mm AIO and the results are fantastic. Previously used Corsairs preapplied paste on the H115i and then ArcSil5 as that had been an old go-to. Saw an immediate drop of 1-2*C right after application coming to this from the ArcSil5; hitting around 72-75*C under full load in P95 small FFTs during stress testing. The nonconductivity is also a huge bonus, as it allows you a little more slack in throwing some extra paste in your pea-sized dot if you need it to ensure full coverage of the IHS. Cannot recommend highly enough.
-
Peter
> 24 hourI am using this thermal paste on my I7 12700 with the Thermalright Peerless Assassin air cooler. I first used Corsair XT50 and my CPU could not shed heat at higher temperatures. I went from thermal throttling almost continually at 95 during stress test to the 70-80 range now and Idle form 45 to 33.
-
Luca DallAra
> 24 hourBuona Pasta termica, mi aspettavo molto di più dalla Noctua, ma anche con un dissipatore normale vedo che le temperature sono più contenute rispetto alla pasta termica preapplicata! Quindi 5 stelle perché sto cmq avendo dei benefici!!
-
Soumyadip Mitra
> 24 hourSame if not batter than Kingpin kpx cooling performance for general usage. Reduced my laptop temps by 10-15°C
-
S. Short
> 24 hourThis is a thick paste. Different from the very easily spreadable ones like mx5, nt-h1 or Artic Silver .
NT-H2 is the further improved second generation of Noctua’s award-winning hybrid thermal compound. Combining the iconic NT-H1’s proven features, superb ease-of-use and renowned long-term stability with a novel, fine-tuned formula of micro particles for even better thermal performance, NT-H2 is an enthusiast-grade paste for the highest demands. Whether it’s air- or water-based cooling, CPU or GPU applications, overclocking or silent systems: NT-H2 will consistently deliver outstanding results and thanks to the included cleaning wipes, it is just as easy to remove as to apply.
Next-generation performance
Further improving the award-winning NT-H1, NT-H2 uses a new, fine-tuned mixture of metal oxide micro-particles for even lower thermal resistance and reduced bond-line thickness at typical mounting pressures. This allows it to achieve even better performance in most application scenarios.
|
|
|
|
|
|---|---|---|---|
Easy to clean with included wipesThe 10g pack of NT-H2 includes ten large NA-CW1 cleaning wipes that are pre-moistened with an isopropyl alcohol mixture and make it child’s play to remove: Simply wipe off the paste from the CPU and the base of the cooler using one of the wipes and you’re done! |
Not electrically conductive, non-corrodingWhile some high-end thermal compounds and pads are risky to use due to their electrical conductivity or corroding properties, there’s no risk of short-circuits with NT-H2 and it’s completely safe to use with any type of CPU cooler, regardless of whether it’s made from copper or aluminium and whether it’s nickel-plated or not. |
Excellent long-term stabilityNT-H2 unique formula is highly stable over time, even after longer periods of usage. It can be stored at room temperature for at least 3 years and due to the compound’s exceptional curing, bleeding, dry-out and thermal cycling characteristics, it can be used on the CPU for 5 years or more. |
Extra-large 10g package for 9-60 applicationsSufficient for around 9-60 applications (depending on the size of the CPU or GPU, e.g. around 9 applications for large CPUs such as TR4 and around 60 for small CPUs such as LGA1151), the extra-large 10g packaging size is ideal for power users who install coolers frequently. |
Easy to apply
Thanks to its excellent spreading properties, there is no need to manually spread NT-H2 before installing the cooler: Simply apply some paste onto the CPU (see instructions for details), put on the heatsink and you’re ready to go!
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| NT-H1 3.5g | NT-H1 3.5g SW Edition | NT-H1 10g | NT-H2 3.5g | NT-H2 10g | NA-SCW1 | |
| Description | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Further improved second generation thermal compound | Further improved second generation thermal compound | Cleaning wipes for removing thermal compound |
| Weight/Size | 3.5g | 3.5g | 10g | 3.5g | 10g | 15x12cm |
| Volume | 1,4 ml | 1,4 ml | 4,0 ml | 1,2 ml | 3,6 ml | - |
| Density | 2,49 g/cm³ | 2,49 g/cm³ | 2,49 g/cm³ | 2.81 g/cm³ | 2.81 g/cm³ | - |
| NA-CW1 Wipes | - | 3x included | - | 3x included | 10x included | 20x included |
| Spatula Included | X | ✓ | X | X | X | X |
Related products
