Noctua NT-H2 3.5g, Thermal Computer Paste incl. 3 Cleaning Wipes (3.5g)
-
Eric Demers
> 3 dayI had been using Artic Silver 5 with an i9700k and H80iV2. Idle temps were 36-45C at 4800 with 0-5% load. Peak temps with small FFTs on Prime95 were as high as 95C on package. Ive set all cores synced at 4800MHz, with C-states disabled. Voltage all set to auto (Idle Vcore at 1.295-1.305).
-
Martin E Sanchez jr
> 3 dayAwesome product will highly recommend to people to buy
-
Jojo T.
> 3 dayTo sum it up it does the job. It is used on both my rigs which are Both Ryzen cpu based. One is R5 3600 and the other R5 5600x. They both run a little warm and max temps under load and PBO enabled with both using a 240 H100 AIO from Corsair reach around the same temp which is 58-61C. For less than 20 bucks this beats the rest hands down for me at least.
-
Katlynn Lockman
Greater than one weekcomo cabe esperar de noctua, perfecto. Vienen unas sencillas instrucciones de como aplicarla dependiendo de la cpu que se posee, recordemos que la gen 12 de intel son cpus un poco mas grandes y no es recomendable usar el método del guisante.
-
juan carlos
> 3 daySiempre he utilizado pasta térmica de Noctua y nunca ha decepcionado con los resultados. Es complicado comparar con otras marcas así que solo puedo indicar mi percepción positiva sobre la refrigración de los micros. Siempre muy buenas temperaturas.
-
Bruno Meschesi
Greater than one weekWorth the money, go with it.
-
Emil S.
Greater than one weekAs described
-
Francesco
> 3 dayOttima pasta ne ho provate tante ma questa e quella che riuscita ad abbattere di 4gradi la temperatura del mio i7 7740x per schede madri x299 notoriamente difficile da stabilizzare .Nota di apprezzamento per la confezione.
-
Carlos
> 3 dayPara mi es la mejor pasta térmica que hay en el mercado. Noctua es siempre sinónimo de alta calidad en todos sus productos.
-
Christian
> 3 dayLa he utilizado para un I7 y mantiene la temperatura muy bien, no depende de la pasta térmica si no del kit de refrigeración pero con la pasta respecto a otras he notado una mejora de 3 grados menos que es bastante.
NT-H2 is the further improved second generation of Noctua’s award-winning hybrid thermal compound. Combining the iconic NT-H1’s proven features, superb ease-of-use and renowned long-term stability with a novel, fine-tuned formula of micro particles for even better thermal performance, NT-H2 is an enthusiast-grade paste for the highest demands. Whether it’s air- or water-based cooling, CPU or GPU applications, overclocking or silent systems: NT-H2 will consistently deliver outstanding results and thanks to the included cleaning wipes, it is just as easy to remove as to apply.
Next-generation performance
Further improving the award-winning NT-H1, NT-H2 uses a new, fine-tuned mixture of metal oxide micro-particles for even lower thermal resistance and reduced bond-line thickness at typical mounting pressures. This allows it to achieve even better performance in most application scenarios.
|
|
|
|
|
|---|---|---|---|
Easy to clean with included wipesThe 3.5g pack of NT-H2 includes three large NA-CW1 cleaning wipes that are pre-moistened with an isopropyl alcohol mixture and make it child’s play to remove: Simply wipe off the paste from the CPU and the base of the cooler using one of the wipes and you’re done! |
Not electrically conductive, non-corrodingWhile some high-end thermal compounds and pads are risky to use due to their electrical conductivity or corroding properties, there’s no risk of short-circuits with NT-H2 and it’s completely safe to use with any type of CPU cooler, regardless of whether it’s made from copper or aluminium and whether it’s nickel-plated or not. |
Excellent long-term stabilityNT-H2 unique formula is highly stable over time, even after longer periods of usage. It can be stored at room temperature for at least 3 years and due to the compound’s exceptional curing, bleeding, dry-out and thermal cycling characteristics, it can be used on the CPU for 5 years or more. |
3.5g package for 3-20 applicationsSufficient for around 3-20 applications (depending on the size of the CPU or GPU, e.g. around 3 applications for large CPUs such as TR4 and around 20 for small CPUs such as LGA1151), the classic 3.5g packaging size is ideal for most users who only install coolers every now and then. |
Easy to apply
Thanks to its excellent spreading properties, there is no need to manually spread NT-H2 before installing the cooler: Simply apply some paste onto the CPU (see instructions for details), put on the heatsink and you’re ready to go!
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| NT-H1 3.5g | NT-H1 3.5g SW Edition | NT-H1 10g | NT-H2 3.5g | NT-H2 10g | NA-SCW1 | |
| Description: | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Further improved second generation thermal compound | Further improved second generation thermal compound | Cleaning wipes for removing thermal compound |
| Weight/Size: | 3.5g | 3.5g | 10g | 3.5g | 10g | 15x12cm |
| Volume: | 1,4 ml | 1,4 ml | 4,0 ml | 1,2 ml | 3,6 ml | - |
| Density: | 2,49 g/cm³ | 2,49 g/cm³ | 2,49 g/cm³ | 2.81 g/cm³ | 2.81 g/cm³ | - |
| NA-CW1 Wipes: | - | 3x included | - | 3x included | 10x included | 20x included |
| Spatula Included | X | ✓ | X | X | X | X |
