Noga NG8150 Heavy Duty Deburr Tool, with 10 S10 blades (Original Version)

(0 Reviews)

Price
$12.99

Quantity
(10000 available )

Total Price
Share
63 Ratings
49
9
4
1
0
Reviews
  • Dean B.

    > 3 day

    We use these at work and they are wonderful for deburring edges

  • Muckus

    > 3 day

    Well built. Included deburring inserts of cry good quality.

  • Cat55

    Greater than one week

    Outstanding tool and must have when drilling through anything metal.

  • Pitty

    > 3 day

    Okay at my work we have red colored deburring tools. They are a jigsaw puzzle just to change a blade and put back together plus the blades suck. This Noga is just the opposite. Super easy to swap blades and the blades give a very sharo clean effortless cut. No issues with jumping just a smooth cut. For what was it $13 u get 10 blades and the holder pretty sweet! Those blades will last for 3 years for me. I debur every day but i use files as well i only debur round stuff and i am not a strictly deburrer. I program setup and operate 2 machines so they are getting used daily but only about 1.5ft worth of deburring per day. Som operators do thay ever 3 minutes. Though they deburr aluminum usually where as i its tool steel like 4140HT and H13 and S7 and H13 pre hards like Vicount44 and Toolox44 (H13 tempered to 44HRC) so they can handle harder steel i doubt they could touch hardened S7 but in the annealed state no problem!

  • Beantown

    > 3 day

    Love these things.....I wish I would have discovered them years ago. I have 5 handles now each with a different style deburring tool. Save so much time and leaves a quality edge.

  • William Lee

    > 3 day

    best product. i only received 1 of the 10 blades though. thus the 4 rating

  • B. Harris

    > 3 day

    Not bad, but not great either. Works well on large IDs, especially at low speed on a lathe (at your own risk, putting tools and ones hands near a running lathe is not safe) and long straight edges, but the blade is too big around to get into tight holes and corners. A good, small file will do everything this will do and a lot more.

  • Lee

    > 3 day

    I work as a machinist and have been using this style deburring tool for many years. I do a lot of hobby metalworking in my spare time and I recently made the decision that I needed one of these tools at home. The ones that we use at my job are the all metal Shaviv ones that cost like 25 bucks or more. Well, I can tell you that I like this deburring tool wayyy more than the Shaviv ones and Im actually very surprised at the quality you get for your money here. The plastic is rigid and the handle is very ergonomic, I can see this lasting for many years. I like it so much I think I might order another one to take to work!

  • Juan C. Rodriguez

    > 3 day

    useful tool, everyone should have one.

  • Nat

    Greater than one week

    If you need to deburr a lot, this is the tool for the job. A quick swipe along the edge and it slices the burr right off. It doesnt leave as smooth a surface as a file but it takes a whole lot less time. Works great for straight edges and holes down to 1/2 or so. Its not so good on outside radii and corners. A word of caution, it IS still a knife and its still capable of giving a pretty nasty cut if handled wrong. This handle has a good positive lock on the blades so they dont slip out. Handle is rubber coated and wide enough for a good grip. You just have to be sure to not grab it too close to the front or you can inadvertently slide the blade unlock. S10 blades are pretty universal, great for aluminum and steel.

Deburrs: Steel,aluminum and plastic.Set contains 1pcs. - NogaGrip 1 handle. 10pcs. - S10 blades. Pack dimensions: 169x117x26mm. -NG-1 Handle (NG1000) S10 Blade (BS1010) Warning: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm.

Related products

Shop
( 827 Reviews )
Top Selling Products