NZXT H7 - CM-H71BW-01 - ATX Mid Tower PC Gaming Case - Front I/O USB Type-C Port - Quick-Release Tempered Glass Side Panel - White

Case has a nice look , plenty of room and lots of air flow

The H7 Case by NZXT is by far one of the best I’ve used. It has plenty of room and makes cable management easier. If your looking for a case that will last and is easily upgradable for future builds this is the case.

Given as a gift to my grandson and he build this to his specs and he finds this fantastic. Great fans. Awesome unit

This is a big mid tower case. Make sure you got the space for it and the table to support it because once you build your computer using this case, its going to be heavy, especially as gpus get bigger and bigger. So what I like about the case is that there are vents and corresponding filters so airflow isnt a problem. The case is metal, so its got a nice heft to it. Since it is a large case, it is very easy to work in. (This is my first pc build, and it was a breeze with this case) HOWEVER the thing that really really bugs me about this case and why I gave it 3 stars and not 5 is that taking off and putting on the panels is by far the worst thing ever. Its enough for me to not recommend getting the case. This is because the panels are held on by a snap-on mechanism, where its plastic nubs on the panels being shoved into plastic holes. The physical connection is solid, but it is too solid in some areas to the point where you feel like youre going to break it (which I did already, one of the holes broke when I was removing the side metal panel). So if youre someone thats constantly going in and out of the case, or just wants to show off the inside, it is a hard pass because my bet is that those connections will fail over time. The entire case is metal and everything else is great, but who came up with this stupid idea for holding the entire thing together? Im guessing it was for aesthetic reasons, but for functionality it ruins the whole case. My friend got the Corsair 4000 flow, and the glass panel is held on by thumbscrews. Thats what I wish NZXT did here. So for $130, getting this case is like ordering a porterhouse steak but it has a giant piece of grizzle. Its good, but that one flaw really ruins the whole experience and leaves you feeling regretful.

This case made building a pc so easy. Definitely worth the price as long as you stick to the NZXT motherboard to go with it

The NZXT H7 Flow is the case weve all been asking NZXT to produce. Although I have used the H510 in many builds and didnt find them to be the ovens that the internet says they are, I still thought NZXT could produce something better as a successor. What we actually got here was a successor to the H710 case, and Im OK with that. The NZXT H7 takes design elements from both H510 and H710, and the result is a truly beautiful, yet simplistic and effective design. Upon unboxing mine, I was surprised at the larger size of the case. However, being that the H7 supports 360mm radiators with either front and top mount support, this is about as compact as it could be. Lets talk about who this case is for. Its not a budget case. This is definitely a mid-tier enthusiast case, at this price point. It is going to be best enjoyed by someone who plans to buy their own fans, and the ditch the included fans. This case would be a great option to show off your RGB components, though I think it looks just fine without it, if that isnt your cup of tea. I opted for the White/Black version, which I think makes for some of the best looking builds, and I personally love the contrasting parts throughout the entire build. Both the front and top of the case are well ventilated, and both have filters. I opted to remove my top filter, as it isnt necessary for my top mount radiator setup, or exhaust fans in general. The modularity and fitment design of the case is wonderful overall, and it was a complete pleasure to build in. The wire management channels and velcro ties are well thought out, and effective at controlling the wiring on the backside. There is a good amount of space to work in, both inside the case, and below the power supply shroud from the back. If using power supply extensions, you will have to take your time, as the space between the motherboard tray and the back panel is fairly narrow. In terms of included hardware, NZXT seems to changed up what is included in their hardware box. For example there is no longer a Y-adapter for headphones/mic to be used with the dual headphone/mic jack on the top of the case. Oddly enough, they do throw you an extra 2.5 drive bracket though. The hardware is pretty good and I think it offers a good value to the buyer. Again, the case does offer 360mm radiator support for both the top or front of the case. If you want to make a radiator sandwich though (push+pull fans), your only option will be to front mount it, as there isnt enough room for two sets of fans along the top. I opted to top mount mine, and set my fans in push below the radiator, and Im very pleased with the results. Ill note that my build has 7 case fans, plus the 3 fans on my GPU. My build is incredibly quiet. If you do decide to front mount your 360mm AIO, youll almost certainly have to mount it tubes up, which contrary to the internet hype, is totally fine and wont hurt anything. In this first build, I liked the presentation of the top mount and the tubes didnt need to do any crazy bends to make it fit. I chose to mount my GPU vertically, strictly for aesthetic reasons. However, I didnt go with NZXTs vertical GPU mount. Instead I chose the Phanteks PCIe 4.0 model, mostly because it was over $20 cheaper, and also because it has mesh across the unused space on the rear part bracket. The new NZXT mount as solid, with no mesh, at a jaw-dropping $90 US. The Phanteks vertical mount also doesnt require any modification to your case, as it did with previous cases like the H510 (which required cutting of the slot dividers). Securing it by lining up the set screws required some patience and good lighting though. Overall, I think it turned out great. Personally, I liked the previous design of the hard drive cage in the H510. It was completely adjustable, and easily supported three 3.5 drives, not just two. Also the H7 HDD cage is secured by four slide-lock feet and a single captive thumbscrew. This is an issue because there are essentially only two positions you can have the hard drive cage in. There are some other compromises as well. One of them is that at this case height, push+pull radiator setup isnt possible with a top mount setup. Also the length of this case would make dual 360mm AIOs (one top + one front) virtually impossible as the tubes would potentially fight for real estate. This might not matter if you are doing a custom loop though. I do have a real gripe about my example. My hard drive cage was drilled wrong. The top slot of the cage had the holes drilled slightly out of spec, so the holes didnt line up properly with the hard drive. I needed to move my HDD cage farther forward to provide additional room for my PSU cables. This would have been fine, except the other hole was threaded wrong, and the thumbscrew wanted to go in at an angle and siezed up. I was able to remove the captive thumbscrew and use another thumbscrew, this time from the bottom of the case, and I was able to rememdy this. Even though I was able to work around this issue, they were super annoying to experience, having bought into this case at a $130 price tag. I was able to work through it because I am an experienced builder, with lots of spare parts. A newcomer might be less thrilled than me with this scenario. These speedbumps are typical for a new product, but are no less frustating admidst what is otherwise a near-perfect case, in my opinion. NZXT clearly needs to clean up their tooling or QC on this model, to make sure the customer recieves a quality product, like the ones NZXT is known for making. Aside from these little issues, I think the fit and finish otherwise are excellent. Im fairly certain this H7 Flow will be an instant hit for PC enthusiasts, and I predict it to be successful enough to get a version 2 down the road. If you are thinking about buying it, I think youll be really pleased with it. The photos are very good representations of what youre actually going to receive.

First time using NZXT, I will be buying them again.

They say you can front mount a 360mm AIO. But there isnt room to *PROPERLY* mount it, with the tubes on the bottom. Oh, you can do it the trash way, with the tubes up. Whoever wrote that should be fired. Preferably into the Sun. Absolutely inexcusable.

An absolute joy to build in. Incredibly thoughtfully designed. Im glad they included only 2 case fans instead of cramming 3 or 4 into the cost and cutting corners on build quality. The buyer can always add more fans, those are easy. There are pass-throughs everywhere you could possibly need them and the detachable cable shroud next to the motherboard is an amazingly clean solution. IMO, its vastly superior to rubber grommets. The backside of the motherboard has what seems like an entire extra case for cable management. Probably a full inch clearance with hooks and cable runs all over. The exposed CPU mounting bracket area on the back of the motherboard also makes installing a cooler a breeze. There is room for a 360mm radiator both on the top and front of the case. The case itself feels strong and solid. Every panel has some really smart pull-off and press-on fitment snaps which are, again, a joy to work with. Immense amounts of room in the main compartment which allows for a ton of uninterrupted air flow through the case and over the GPU. Really glad I went with the H7 flow. Clean and sharp look, roomy, wonderful to build in.

my son said it is perfect.