OFFROADTOWN LED Pods 4inch 144W LED Work Light Quad Row LED Cubes Waterproof Driving Light Spot Beam Offroad Fog Lights for Truck UTV ATV SUV Boat 4x4 Car

(131 reviews)

Price
$25.99

Color
Quantity
(20000 available )

Total Price
Share
10 Ratings
5
5
0
0
0
Reviews
  • Perry M.

    > 24 hour

    I have 18 of these lights . I put them on my new Kubota tractor for front floods and rear floods also on the front of 3 of my trucks and the rear for work lights. and on 3 of my skid steers. They are tough, easy to install, and very low power draw. If you have more than one light per switch you may want to use a 40 amp relay.

  • Jon P. W.

    > 24 hour

    Install was easy. Were bright when turned on. However, after the first wash, one of the lights let in condensation and water beads up on the lense now anytime the weather is wet or the truck gets washed. Very disappointing…

  • Kris Moore

    > 24 hour

    I use these as work lights on my tow truck. They are bright and great to have. However they are not nearly as waterproof as they claim to be. Had to replace my first pair under warranty. (Which the company handled well). Upon receiving the replacement set I disassembled them, silicone sealed any possible water intrusion sight and installed them once dried. No problems since.

  • Dr. Jerrell Collins

    > 24 hour

    On the smaller side.They seem to be water resistant I drove in the rain for 30 mins and dont see any problems. Didnt come with instructions so it took a little to figure out but not hard. Easy to install to 30 amp relay running 14 gauge wire. Simple power and ground. Bright lights!

  • EBFRML

    > 24 hour

    These lights are 10 times brighter then I expected. You will be surprised. I have bought several of these and all of them are awesome. You will not be disappointed

  • Mr Hollingsworth

    > 24 hour

    Great lights . put them on my sons Ford ranger great off road and freeway lights. When no one is in front of you that is.

  • Nyati

    > 24 hour

    These only get 4 stars because they were missing a few parts when they arrived, other than that the product has been flawless. These have been on my Duck boat getting Wet and Dusty since September of 2017. We have had no issues and they look almost as good as the day I put them on.

  • Gerardo O

    > 24 hour

    - update, One of the cubes was out, I emailed the seller raising my concern. I told him that if he can replace just one of the cubes due to the fact that the wiring was done. He said no problem, just to give him some time. Three days later I received a whole set of cube lights. They look awesome on my truck, it has greatly improved the visibility while backing up at night. Several people have asked me about them.

  • Capt. JAG

    > 24 hour

    Ive bought four others from Rough Country. These are incredible bright and they rival Rough Countrys quality and are even brighter. I figured for the price if they didnt work, that I didnt lose anything. I wish I had bought these first before I had purchased the Rough Country ones. Ive had these for a few months and theyve exceeded expectations, my friends dont believe the price for its performance. Ive been through torrential downpours and no leaks or fogging. Now only time will tell how long they last but lets just say one year for giggles and grins, it would still be worth it.

  • William

    > 24 hour

    If anyone was wanting to know how many Amps these things draw its not very much. Each individual one draws about 1 - 1.1 Amps. With both connected they were drawing about 2.1 amps. Im turning them on and off with the use of a 12v relay. The relay coil is controlled by the backup light circuit. Ive run a power wire back from the front of my truck protected by a 3 amp fuse. Pros: The lights are bright, easy to install and come with a IP-68 water proof rating (Good to 30 meters. If my truck gets deeper than 30 meters under water, I think Im going to have bigger things to worry about than my backup lights failing :-)) Cons: The mounting bolt goes through a bracket that the light then mounts to. You have to have access to where the nut is in order to tighten it up. If you do, then no issue. If you dont, then the only way to tighten it up is by spinning the bracket, which rotates the bolt. Its not a show stopper, but makes it more difficult to position the light from a rotation standpoint. I prefer the brackets on this light better. https://www.amazon.com/gp/product/B00IY3YLCI/ref=pd_rhf_ee_s_vtp_ses_clicks_0_1?ie=UTF8&pd_rd_i=B00IY3YLCI&pd_rd_r=ZBQ8TX1TCBVZA75BAH40&pd_rd_w=LUMZl&pd_rd_wg=ZI7a1&pf_rd_i=desktop-rhf&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=05d75987-58ed-4d36-bbfa-515cd87e4ee3&pf_rd_r=ZBQ8TX1TCBVZA75BAH40&pf_rd_s=desktop-rhf&pf_rd_t=40701&psc=1&refRID=ZBQ8TX1TCBVZA75BAH40

Related products

Shop
( 647 reviews )
Top Selling Products