













Perlegear TV Wall Mount for 13-42 inch Flat or Curved TVs & Monitors up to 55 lbs, Full Motion TV Wall Mount with Articulating Arm, Swivel Corner TV Wall Mount, Max VESA 200x200mm, PGSF6
-
Rick
> 3 dayThe materials used to manufacture this mount are plenty sturdy, matching the quality of 2 other mounts Ive installed. All the hardware you need for mounting is supplied and I had no trouble finding the correct size screws for my 21 monitor. They also supply a mini level and an allen wrench for some of the adjustments. There is an upper bolt that attaches the VESA plate to the swing arm that requires a 15mm socket wrench to turn. The screws into the wall need an 11mm socket. The instructions give equivalent non-metric sizes if you need that. I thought the instructions were pretty good, not like some of those pictures-only instructions you end up with sometimes, these were written in 6 different languages and the English was clear. One thing to make sure of is that you drill the correct size pilot hole for the wall screws. I accidentally flipped to the page for mounting onto a brick wall, but figured that out when I realized the pilot hole would be bigger than the screw, because on that page you are drilling for a wall anchor. Flipping back a page to the stud wall install, I got the correct pilot hole size. Kudos to them for listing the pilot hole size too, lots of times you are left guessing what size hole to drill. Probably some of the most complete instructions Ive ever seen. Even the bag with the screws and anchors has a warning on it to only use the anchors in masonry. With my monitor up off my desk, Im super happy with this.
-
joan
> 3 daySuper easy install works great
-
Erica Henderson
> 3 dayWas easy to use & works perfectly!
-
keith
> 3 dayEasy to install, very sturdy and works very well. I would recommend this if you need a swivel, adjustable mount.
-
Colleen Strickler
Greater than one weekI used this to mount a 24 TV. The mount was fairly simple to install with easy to read instructions. It can be extended and tilted with no problem. The mount is metal and comes in two pieces. The mounting bolts are heavy duty and comes with drywall anchors. It also comes with an allen wrench to tighten adjustments. I recommend installing the mount into a stud in the wall. This might change the placement in which you have to install the mount. I would be weary of installing it with the drywall anchors. I think the mount would be fine with the anchors. However, if you plan on pulling on it to extend it and tilt it, I would install it into a stud.
-
Hogee Pogee
> 3 dayI used this to mount a 27 television. It worked out perfectly. We were able to get it right into the corner so I could hit a stud and the arm is long enough to articulate however we want to access the back. The quality is excellent and the powder coating is smooth. My only wish is that it had built-in cable management. Other than that, it worked out perfectly for us.
-
C. Shotts
> 3 dayTV mount is constructed well and comes with all mounting hardware to match many tv screw patterns. To ensure a sturdy installation, you need to attach the mount to a stud; the lack of horizontal adjustments limits where you can locate the bracket to hit a stud. If you plan ahead where you want the final location of the tv to be, you can compensate for this limitation. Overall, a good product that will do the job well.
-
Jerry L.
> 3 dayWorked out perfectly on a 32 Samsung TV
-
J T
> 3 dayThe mount is built very well and sturdy. I used this to mount a 39 LED flat panel TV and it works great. The instructions say you must mount to a stud, but I used drywall anchors due to my location and the TV not being very heavy and have no issues. The mount comes with a variety of installation screws and spacers to account for various shapes of TVs which is nice. I made the mistake of centering the mounting bracket exactly where I wanted the TV before I realized that when the mount is fully flattened against the wall the TV is offset about 1.5 to the right of the mounting holes so make sure to check that before installing. Just my mistake and nothing against the mount. Once installed, its very easy to tilt or move the TV around. Im very happy with it and have no complaints!
-
Alex gray
> 3 dayI use to use a TV stand with the mount on it, but the screws kept getting stripped, so I had to buy amount for the wall and it’s a very good mount