PGN (2 Pack) 6203-2RS Bearing - Lubricated Chrome Steel Sealed Ball Bearing - 17x40x12mm Bearings with Rubber Seal & High RPM Support

This review is for(2 Pack) PGN 6203-2RS Sealed Ball Bearing. I needed to replace the bearings on my 1.5 HP Pentair WhisperFlo pump/motor (manufactured in 2012) and I purchased this pair of bearings together with a seal kit. The bearings arrived on time and as advertised; each bearing in a sealed bag and individually boxed. I cannot comment on longevity or durability as I completed the bearing replacement just a few days ago. The bearings were an exact fit and the pump motor has been running fine; I am satisfied with this product and I would purchase the same again, if needed.

Bearings fit perfectly used for S2000 idler pulleys

I appreciated how quickly I got the product and how reasonably priced the bearings were.

Bearings arrived quickly and were exactly what I needed. Seems like good quality parts.

You cant beat these exact replacement bearings. Now my barrel fan will keep the animals cool for years to come.

After 4 months the bearing will have to be replaced. Started to become very noisy. This is on my pool pump and only runs 9 hours a day.

These bearings were packaged very well they will do the job that I bought them for

got what I ordered

Installed these into my two idler pulleys on my Toro ZTR mower. One bearing is buttery smooth and is all a bearing should be. The other however, seems to have a slight tight spot when manually rotating it and it feels as though metal is turning on metal. I removed the grease seals (barely had grease inside it), and I added some Valvoline w/moly high temp bearing grease. This seemed to improve the feel but it still seems to have a more slight metal on metal feel. Plan to use them until failure - after all, they were less than $4 each folks!!! I really liked the pliability and tight fit of the grease seals and the fact that they snap back into place when reinstalling...

Cheap bearing that didnt measure to the dimensions as advertised. If you need precision this wont do or maybe it will depending on the manufacturers quality control. I ended up paying 5 times more with McMaster-Carr but getting the precision for my application was worth it.