I got it for my vr headset to keep the cords out of the way for when I play, and it feels amazing because I dont need to get the wireless adapter which are 300 bucks, and it works great

There are many variations of this product , But i find this one has the highest quality .

didnt come with a hook that was promised but still a charm. please buy if you use pcvr

So far i got 3 sets of these and they work great i use them on multiple Vr sets in room scale they came with everything i would ever need for my room scaling Vr wires all but carabiner clips no problem carabiner clips are cheap to buy on amazon, Thank you for the great VR Pulleys sets, The HMDs are unclipped in the picture i used 3 pulleys for the Vive Index and 2 pulleys for the Oculus Rift CV1 only 2 pulleys for the oculus rift CV1 do to the oculus wires are much lighter then the Vive Index wires, the pulleys have some major tension to them while under load using to many pulleys they will pull your HMD off your head or ripe your wires out the HMD so make sure you have a Loop behind your head when pulleys or being used and dont go over board with pulleys or will be hanging yourself from the pulley tension the wire sets for any vr system are expensive.

I had the version 1 which used a category steel cable. Those were under more tension though and always wanted to pull my headset off. And they kept breaking. These have about half the tension which us perfect. More than enough to pull your cable back but loose enough that movements wont make it want to pull your gear off.

It is exactly what they say it is, had no problems with it and it work.

When opening the box I was very surprised at the quality of the materials used to make these. But the important part is they are so easy to setup and work great with just the right amount of tension, very happy with this purchase. A must have for any wired VR user.

I have a 10x10 VR play space. 2 pulleys was all that I needed. I have a 16ft cable and i can easily move around my entire play space. Edit: I ended up using all 3 pulleys. You can adjust the amount of slack as needed.

Very easy to install and comes with enough hardware to accommodate different installs for different surfaces.

This little pulley system worked was just what I was looking for to keep the PC link cord from getting in the way while my son and I played on the Quest 2. The cord no longer gets in the way, and does not get tangled up in either peoples arms or pets legs. I have it set up so that you can pull the cord all the way to the ground, and it works perfectly. It is a must have if you use the PC Link cable while gaming, which we do most of the time. I did not use the adhesive hooks (as I have never had luck with any adhesive wall or ceiling attachments-I purchased this set only for the little pulleys,) instead I used screw in hooks with clips so the pulley could not slip off. The rubber cable attachments work well to keep the cable from slipping. The pulley system feels as though it might have too much tension at first, however when you set it up and hook it up to the headset, it works perfectly, and you do not even notice it. (we make sure the cord is attached to the headset with hook and loop (Velcro), so that there is no tension on the actual USB-c port. I do not tend to by much in the way of accessories for game systems, as I think the game systems are expensive enough, however, if you use the PC link cable with your V.R. system, then this item is the best accessory you can purchase for your headset.