RG58A/U COAX CABLE 3 foot Jumper for CB / Ham Radio - Workman CX-3-PL-PL -Made in the USA

Good quality material, well made, velocity factor 0.66 exactly as specified, flexible center conductor perfect for mobile or base applications.

Wire was soldered to connectors on both ends and cable works well with SWR meter.

I have no problems with these cables as jumpers except on 2 radios. When the ring is fully tightened, the connector is still loose.

Radios needs,or nutting.

Works as intended.

Good as expected. Especially for the price. Perfect for SWR Meter jumper cable between the CB and Meter.

Great

Not having the tools to cut and solder my own connector to the cable I chose to purchase one pre-made. I needed a short 3 foot cable for hooking a meter between the antenna and radio. This worked perfect for my use. It is a smaller diameter flexible cable suitable for indoor use.

I used this jumper from my coax switch to my tuner for a few months before realizing that it was faulty. My antenna tuner took a long time to tune and the tuner couldnt save the settings - which is a solid indication of a a variable connection . I was able to narrow down the tuning problem when I compared this jumper with a jumper of known quality using an antenna analyzer on the output of the coax switch attached to a resonant antenna. The SWR was consistently >10:1 - I now see that they are currently unavailable - which is a good thing. Better to buy from the a vendor with a good reputation than here.

These are good 3ft jumpers and work well and seem to be well made. Not had them very long so I hesitate to rate them higher.