RKURCK 2 Way Power Distribution Block, 0/2/4 AWG Gauge in, 4/8/10 Gauge Out, Car Audio Stereo Amp Distribution Connecting Block for Audio Splitter (2Way)

Good quality and easy to install. Used two of these for an audio install on a boat. Ran 4 gauge from the battery’s negative and positive and fed two amps; one with 8 gauge and one with 10 gauge. Worked great.

Used two of these, one for power and one for ground 12V distribution in a Transit van camper conversion for solar, inverter, alternator, and light, pump and fridge loads. Did have to be careful with the aluminum solar power cables as it tended to break off the wires when screwing them in but got it figured out by removing only the face of the insulation then works perfectly.

This is an aluminum block that has been plated. Silver color when I filed a corner. Non-magnetic. Not copper. Not brass. Buyer beware. Wouldnt have bought if Id know it.

nice

Im undetermined on whether this block was milled from a single piece or weld-joined. In either case, the workmanship is excellent and the wire holes are some 25% larger than the maximum gauge supported. Im particularly pleased with the screws, as the tips are cut to prevent backing out due to vibration. All in all a great upgrade to my 3D printed power distributors, and reasonably price for the quality.

Ottimo, tutto ok!

Pretty straight forward here.

Very high quality product for a great price.. shipped super fast and very pleased

Super simple to use and set up

Su facil instalacion