













SALI 25 Pack Cut Off Wheels 3 Inch General Purpose Metal Cutting Wheel for 3 in Angle Grinders and Die Grinders- Cutting Disc Aggressive Cutting 3 x 1/16 x 3/8 Operating Up to 25000 RPM and 80 M/S
-
Randy Morris
> 24 hourWorks good on my die grinder nice supply
-
Richard K.
> 24 hournice blades for a 3 cutting tool. I use mine in a Bauer 20v tool.
-
D. A. Lindsey
> 24 hourThese little cut-off wheels are very rigid and have, so far, proven to be a well-made product. They cut and grind the plastic and fiberglass Ive tried them on quite well and did a serviceable job on the thin aluminum and steel I tested, though for thicker materials, I would suggest going with a larger wheel. They are very thin, so they leave a much narrower cut line than larger wheels, so if youre trying to cut something open/apart that you want to put back together later with a minimum of filling/puttying (like I sometimes do), then these should work very well. It is possible that the thinness of these wheels would would make them unsuitable for thick materials, so keep that in mind. Definitely recommended, especially at the $9.99 for 25pcs price!
-
Brakes
> 24 hourI use these in my right angle air grinder. They seem to perform well, maybe grind down a bit faster than cut with more expensive discs. But they do the job. Remember to always wear a face shield as these can fly apart, thus the nickname “death wheels.” I had no failures but you should prepare for the worst. I recommend
-
Just Another Earthling
> 24 hourSALI 50 Pack Cut Off Wheels 3 Inch I cut a lot of metal for various jobs and projects. These cut off wheels have already come in handy. They work well, and come at a decent price. Feel free to purchase without hesitation . The photos on Amazon, provided by the seller, do more justice to the product than any I could add. Explaining my rating system: 5 - a superior product - I would recommend 4 - above average – a great choice 3 - average – what one might generally expect 2 - below average – I would advise seeking an alternative 1- horrible – a waste of your valuable money - avoid if at all possible
-
Nancy
> 24 hourI have only slightly used one of the disks for cleaning up a piece of steel before welding it. The disk did its job and seems to hold up well. If my opinion of these chances I will update this review. For now I would order again
-
Spencer in Seattle
> 24 hourUntil cut-off wheels are invented that will last forever, there are big boxes of wheels to keep the supplies intact. These are for the little grinders -- 3 x 1/16 x 3/8 Theyve been as good as the others Ive used. No problems so far.
-
R. Brewer
> 24 hourThese fit my Harbor Freight die grinder like the originals and cut great. They are a bit thin so you can’t bend them much but they get the job done. Great for small jobs and tight spots.
-
Horns n Thorns
> 24 hourI got the 25 pack. This size is not my normal size. I either use 6 or 2. The 3 does have its place and I was in need of more. For the price they are a good value. For a size I dont use often I do not need a premium cut off wheel. I am happy with them, I have used worse and I have used better at a high cost. Zips though sheet metal at 25K RPM as you would expect from any other cut off wheel.
-
Bill Grizzle
> 24 hourGood cutting wheels that didnt fall apart or wear down quickly.