SALI 50 Pack Cut Off Wheel 4 1/2 Inch Cutting Wheels 4-1/2 x 3/64 x 7/8 Professional Cutting Stainless Steel, Angle Grinder Cutting Wheel,Cutting Discs with Aggressive Cutting Upgrade (4.5in, 50)

Every time I buy cut off wheels in bulk, I end up losing a few. These come packaged in what looks like an old CD ROM container, which is super convenient. The wheels themselves work very well, where a more precise cut is required. They are only 3/64 wide, so they are going to fail more frequently than the thicker models. Its a tradeoff between clean, precise cuts or brute strength. I have been suing these with my cordless grinder to trim off some exposed bolt ends on my dock and they have proven every bit as good as the brand names wheels they have replaced.

Cheap

These cut off wheels work really well and are long lasting and do the job. However they advertise 50 for the pack and when I receive it theres only 25. Now I dont know if thats a complete fluke/accident or if they are doing that on purpose but it is definitely not a good thing. Hopefully they simply misplaced the other pack of cut off wheels during shipping somehow. At any rate the cut off wheels themselves work quite well and do exactly what they claim to do if they would send 50 it would have been 5 stars.

They come packed in a plastic tube and wrapped in plastic , 25 in one pack. It arrived in perfect condition and excatly what I needed. They are very thin so it will cut thru metal nicely. I have thicker one but thats not for cutting,these are for cutting. Happy I bought them and Amazon dies a very nice job in the shipping and packaging of the product, glad I bought them. If for some reason they dont dork as intended I will leave a update but I feel that wont be nessasary . Extremely happy with the product. Update on the cutting wheels, they wear down pretty quick and to make it better for you to understand ,on a scale from 1----10. I wood give them a 5. I used metal cutting wheels before and they worked and lasted long ,these dont they do the job and for a 50 pack you cant go wrong but dont expect it to be as good as a name brand like dewalt or even craftsman they work but not as good. .

I have tried Manny cutting wheels and this one lasts longer and seems to be a straiter cut. I will be buying these again!

Im a pretty handy old guy, but I had never used an angle grinder. I had some steel tracks from two overhead door openers that I had changed out. It isnt easy to get rid of 12 long steel items. So, I purchased my 1st angle grinder, and these cut off wheels. Honestly, I had no idea how many I would need, and these were available to me, so I ordered them. The arbor holes were cut to spec and fit perfectly. They were exactly 4.5 in diameter. I made two cuts on each of the two rails. Each rail had about 6 of metal to cut through. So, about 24 of metal in total. I hope you can see the cut ends. Smooth, but with some jagged places. This is probably more attributable to the operator than the quality of the blade! If they were not headed for the trash, I would have been more careful. After completion, I removed the blade and measured the diameter again. 4 7/16ths. I have no experience to compare to, but that seemed very reasonable to me. I tried to take a picture of the used blade sitting on a new blade, but there was so little difference, you couldnt see the new blade hanging out from under the used blade. At roughly 35 cents per blade, I was impressed. So, now I have 49 new blades and one with some life left on it. Im looking for stuff to cut! I hope this honest review was helpful.

The first thing to say is that this cutting wheels is packed in a plastic box, so it looks neat and easy to carry. Secondly, each can be used about 30 times, which should be considered normal. Anyway, it did what I needed for the job, and Im happy with it.

i have only gone through 2 of these wheels but i am very impressed in how long they last and how well they cut. They are thinner but that works better in my cordless grinder. I would rate they even better that Harbor Freights HERCULES brand - which I did notice lasted longer than their Bauer or Warrior brands. I have used them mostly for cutting of stainless sheet but have also used them a fair amount for cutting off nuts and bolts. I even used these for a little face grinding stainless rivets off - which I know they werent designed for but they even held up to that abuse. I also like the container they come in that will allow them to be sealed back up until I need another. I would definitely but these again when I ever need more.

I ordered these because I use a grinder all day cutting 1/4 up to 1/2 inch angle iron all day long, cutting up docks on the water here at the Lake of the Ozarks. Cutting wheels can get expensive BUT a torch can carch your floats on fire. Im impressed by these wheels. If you know how to use a cutting wheel, with the Sparks always coming back towards you, these last as long as the expensive ones and cut as fast or maybe even faster. They cut real good. I went through 50 of them so far. I ordered a hundred of them and I will be ordering more for sure

I go through a lot of these cutting various pieces of metal (sheet metal, cattle panels, etc.). These perform as well as any others I have used. The rate they wear down is based on the density of the material being cut, But they are inexpensive enough that I’m not hesitant to use them frequently.