SimbaLux Acrylic Sheet Clear Cast Plexiglass 12” x 12” Square Panel 3/8” Thick (10mm) Transparent Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft, Easy to Cut

I used this to make a giant base plate for my router. It involved drilling about 40 holes. The plexiglass held up well without cracking and seems very sturdy when complete. There seems to be no bow in the plate even when holding the weight of my router. Great for lots of projects where you need sturdy and see-through.

I am very pleased with it.

I made my own lightbox and this is way cheaper, and much lighter than using a glass. When I ordered a customized size of glass, it took me two months to get it due to small quantity of order volume. You can have this within 2-3days and cut it by using a table saw.

I used this sheet of plexiglass to create a larger base for my router. Worked absolutely perfect for that. The sheet is thick enough to handle abuse but stays clear so I can see what I am doing. Drill was fairly hard to do on the bigger bit but that was expected.

The dimensions of this panel are dead on. It arrived wrapped in bubble wrap securely enclosed in a tight-fitting box and there was absolutely no damage of any kind. Both sides are paper-faced to allow storage, handling, layout, cutting, drilling, etc. without marking the material until finished. Mine will be used cut into smaller pieces and drilled for use as craft vacuum chamber covers. Excellent material, service, and delivery.

Bought this for the plate on my homemade router table. It came exactly as described (12x12) and will ensure my router doesnt sag in the table since it is 3/8 thick. Looking forward to spending the winter building things in my garage!

Little thick for my project, but very sturdy. Comes with the brown wax paper lining on both sides just like in the picture, perfectly window clear. Packaged well for shipment. Recommended.

Used this for a router station. Works great.

Exact measurements

Order came ontime and not damaged.