Supermicro MCP-220-00043-0N 3.5 convert to 2.5 HDD Tray

Ive purchased three, and every single one (except the third, which hasnt arrived just yet) has been absolutely perfect. This is exactly what I needed!

Perfect. I was very impressed with the build quality and fit on this. The sled has a an ssd conversion mount pre-installed with 4x supermicro style sled screws. The ssd conversion mount includes a small bag with an adhesive standoff that was not thick enough to contact my Samsung 860 EVO ssd and 4x well fit ssd machine screws to mount the ssd. My 860 EVO is well positioned to engage the Supermicro chassis.

This product worked exactly as needed and is of high quality at an affordable price.

These work perfectly for the 36 bay Supermicro case. Mounting is a little tricky as you have to disassemble the frame to screw in the drive entirely, but is no different than using another adapter. Connections match up perfectly. Just ensure you have the drive oriented correctly.

This do the job to support 2.5 drive. However, the tool-less version (MCP-220-00118-0B) is much better! No more screws.:)

Comes with a full set of screws and rubber pad for thin SSDs.

It fits, seems well built. Was able to add a 2.5 SSD without any issues. The screws were a little awkward to get to.

Entire drive bay + converter tray. + rubber pad + 6/24 screws + 3M(2.5?) screws, whatever the screws for 2.5 hdds are, it comes with those and the normal 6/24 sets.

Supermicro sells TWO (2) different 3.5 to 2.5 drive bay converters, with little documentation. That makes it hard to know which is which.

Works for installing Crucial SSDs in SuperMicro 6027s. I had tried Icydocks - they DO NOT work with this config, looks like the connectors dont fully mate so the drive is never powered up.