Supershieldz (2 Pack) Designed for Apple iPad 9.7 inch (2018 and 2017), iPad Pro 9.7 inch, iPad Air 2 and iPad Air 1 (9.7 inch) Tempered Glass Screen Protector, Anti Scratch, Bubble Free

Weve bought this several times over the years for iPads. It works great for protecting the iPad. Easy to place without bubbles.

I remember a time when an iPad screen protector was $25-$100! No joke, there was one at the AT&T store back in the day for 75 freaking dollars. “But it’s tempered glass“ Amazon saved me back then, as it saves me now. The price of these iPad Pro 9.5 inch screen protectors is fabulous, the quality I have absolutely no complaints, the ease of installation made me happy. There is a small learning curve to installing these types of screen protectors and by the time you have done it a few times you are a pro. If you have any pets or have a dusty house for whatever reason going into the bathroom and turning on the shower hot and letting it get steamy helped me tremendously! Don’t make it so steamy you cannot see your hand in front of your fac, but make it like you are taking a normal shower. I went through two screen protectors in a row that kept getting pieces of fur stuck to them during the installation process. A friend recommended the shower room method and lo and behold it actually worked! I don’t know how or why I’m just happy it worked. I don’t really bring my iPad out of the house, I have a hard shelled cover over it, but I like having the extra protection of a tempered glass screen protector. A shattered screen protector is a more welcome sight then a shattered iPad Pro screen. I have had no problem with fingerprint recognition, touchscreen recognition, etc. the price and quality of the screen protectors is fabulous and I will definitely be back for more

I love this screen protector. Its thick and durable and easy to put on. I would definitely recommend

Supershieldz is my Favorite screen protector. I use it on all my family members Apple Devices. In total we have 3 Apple iPhones and 2 iPads and this is the only screen protector I use and recommend. Make Sure you get exactly the one you see here in the picture. Anti Fingerprint, Ultra Clear, Real Glass, Extre Sensitive, 9H Ultra Hard Coated, Oleophobic Coating. It is a sheet of glass that is flexible and very thin. Do not over bend. When applying make sure you clean the table with a damp cloth to prevent dust landing on the screen while you apply it. Shut the device off so you can concentrate without being disturbed. Lay the glass on the device without removal of the film on the back of the glass, so you can line up the home button and ear piece. Inside the box are 3 sticker and 1 round sticker on the same sheet. Use the 3 stickers to create a hinge like a door hinge. Put the stickers up one side of the device with half the sticker on the back then wrap it around the device to attach it on the glass. Before attaching the stickers to the glass make sure everything lines up correctly. Once attached the glass will swivel like a door. Finally, remove the round sticker from the box. This sticker is to remove any lint or dust that may have fallen on the device screen. Lift the glass while hinged, one hand holding the screen and one hand blotting the device screen to get lint off. Now, with both hands slowly place the glass on the device screen making sure everything lines up. Once down press the center of the screen and it will glue itself to the device. You will see it happening. If there are bubbles, Gently lift the glass from the corner closest to the bubbles and work it out from the top with the small cloth supplied. Try not to touch the glass on the bottom once you remove the back film. If it breaks down the road don’t worry. Gently lift the broken screen protector and throw it away. Clean the device screen with the alcohol pad provided and put new screw protector on it. I’ve dropped my device and had to replace it a couple of times. Now I’m like a pro at it. Just be patient and you will be fine.

I have been a long time user of SuperShieldz protectors, they have definitely saved my phones more than a couple of times. They are great for keeping your device screen scratch free (even saving mine from some close encounters with pavement) and for regular use that does not require minuscule precision (typing, playing games, checking Facebook, etc.) I have found such protection comes with a cost on the touch precision (when using a stylus for writing/drawing). Given my good experiences with this brand, I didnt hesitate to buy this protector for my brand new iPad (6th generation, 2018 model), the installation was not so hard, however I noticed the top cutout (the one for the front facing camera) is only big enough to not cover the camera, but it does cover the light sensitivity sensor right next to it (see pictures), I do not really think this is such a big deal though. I did not really notice any impact on my normal use while using the sensor, other than the slight difference in depth when using the home button (this protector IS thick). However I bought this iPad to use as a note-taking tool for school, and when I tested taking some notes (I am not using the apple pencil I use instead, a cheaper, Meko high sensitivity stylus) I DID notice a difference. Without the protector, I didnt really have any issues when writing (using the Goodnotes app), however after installation some of my strokes are not detected, so I have to write some letters more than once before they actually appear on screen while taking notes. I also noticed that the place where my pen tip is, and the place where the stroke is detected is slightly off, while this might not be of importance when taking notes, it might be a problem for anyone that uses their device to draw. Overall the protector does feel like it will do its job in saving my screen from cracking, so Ill just stick with it, depending on how annoying the sensitivity problem becomes (missed detection of strokes when using my pencil), I might have to get a thinner (and less protective) screen protector.

Ive installed this product three times. Each time I followed the installation video step by step, which I recommend doing. Twice I got perfect results. The third time, I wound up with two dust bubbles from pieces of dust that were too small for me to see while I was using the dust-absorber, even though I was wearing glasses and working in very good light. I also had more air bubbles than before but was able to remove them. You can tell they are dust bubbles rather than air bubbles, because you cant move them to the edge of the device and remove them, first of all. Also, a dust bubble has a defined center, but an air bubble is equally amorphous throughout. What to do with a dust bubble? Id LOVE to get the companys advice on this. Should I just remove the screen protector and start over? What Ive tried so far has been only somewhat successful. I pulled back the screen protector partway by the corner edges, and then use the dust-absorber in the center of each dust bubble location. Then Put screen protector carefully back in place and remove all air bubbles. Result: Removed one dust bubble; one still remains but closer to the screen edge so much less annoying. Got out almost all air bubbles, except two at edges, which are probably indications that the stickiness is less than perfect in those locations. So, Ill live with this screen protector for a while, until it drives me crazy, then take it off and install the second one that came in the package, using the dust-absorber even more than last time, which was already more than was shown in the installation video.

Pretty simple and straightforward. This was the first time I actually nailed installing a screen protector. I do the hot shower trick. Run your shower on hot for a minute or two with the door closed. Once its nice and steamy, prepare your iPad by using the alcohol wipes and sticker to remove any excess lint from the screen. The steam from the shower helps remove any lint or other junk floating in the air and helps prevent getting lint stuck between the screen and screen protector when installing. The guides actually work. I was always skeptical of these guide stickers. I actually read the instructions this time and I was able to get my screen protector about 99.8% perfectly lined up (youd never notice it wasnt 100% honestly, when using it). No air bubbles, no lint, basically a perfect screen protector install. Any initial air bubbles I was able to remove just by rubbing it with my finger towards the edge of the screen. I was incredibly happy about this product and the installation of it. Its been nearly two months since Ive installed it and its still working great. I do have a portfolio case on it which helps protect the screen, but I have dropped it a few times on hard surfaces from standing up and it hasnt cracked or anything yet. I dont even notice any surface scratches. For the price it was well worth it.

I will never go without these ever again they will save your screen like they have mine countless times( my 3 year would be an excellent tester for these) never once in over a dozen times has my original screen ever been damaged while having these on I just replace with a new screen protector and go on, then the 1 time I let it out of my sight for minutes after having removed the broken protector and getting ready to put a new one on he freakin drops it!! Jus having the big foam-like bumper case was not enough without the glass screen protector and it cracks the digitizer so I had to replace it which isn’t hard but it is ten times the work of these screen protectors. I have these on all our iPhones and iPads and will buy nothing else after trying other high priced brands on to find out they were junk and the worst thing about a lot of them is when you go to remove them one brand in particular took me hours to remove it was the worst experience ever trying to get a damn screen saver off but these things every time go on Very easy and when it’s time to replace them they come off very easily without damaging your original screen

I did not find any issue with installing other than it was difficult to get the bubbles totally out, and ultimately some still remained. While you could see these when the ipad was off, they did not show when it was operating. With this protector on, my ipad view is crisp, finger imput is sensitive and so far fingerprints are not obvious. I am pleased with the purchase.

I just installed this on my iPad 6th Gen. I had purchased another product which was terrible and non touch responsive. My screen has just undergone a repair and the non OEM glass is pretty grainy. This protector makes it look much better.