Swidget 15A Outlet - Smart Plug Power Outlet Switch for Automation - Requires Neutral Wire - Compatible with Swidget Smart Inserts for Remote Control & Power Monitoring

I see a lot of the reviews on this product are for the inserts that are sold separately. Personally, I have had no problems with the outlets (or the zwave modules) and I am quite the fan. I use these with OpenHab and absolutely love them. The modular idea is amazing, and I love it. My only criticism is the wires coming out the back, vs push to insert holes, but it is just a preference thing, there is nothing wrong about it. They also include wirenuts for convenience, but again my personal preference is for lever nuts. Update: For anyone purchasing this and concerned about the size of your box... Try these nuts: https://www.amazon.com/221-412-2-Conductor-Compact-Splicing-Connectors/dp/B00JB3U7Y6

Originally, I ordered this smart outlet for its high configurability in being able to swap modules for guide lights, USB connections, temperature sensor, motion sensor, etc... At least with the two different modules that I used, the Swidget smart outlet has lived up to its billing! The outlet is a regular dumb outlet until you buy the smart module insert. The smart module (sold separately) inserts allows you to utilize different sensors, connections (guide light, USB, etc...), measure energy usage, and allows you to turn on/off the bottom socket via the Swidget app. The top socket is left always on. The Swidget app is downloadable for Android and iOS. Installation: The Swidget outlet comes with a wall plate, wiring nuts, screws, and instructions. Check with your local electrician if any questions on the wiring, but the insulation of the wires is already pre-stripped. The physical installation is similar to most other smart light switches. Once installed you need a smart module insert to install the outlet and the appropriate software. if you do have a smart module then you just insert it and follow the instructions from the Swidget app. Once fully installed the app allows you to measure the power usage and control one of the sockets. I used a WiFi module so it allowed me to use WiFi to connect to the outlet and once connected there was a Firmware upgrade that was applied. There are other modules that you can purchase from Swidget for Z-Wave and other features. Would suggest to Swidget that they cut the wiring insulation a little longer as I needed to strip off another 1/4 to ensure the wiring nuts held. I did have an issue with the SW detection of the smart modules, but their Customer Service was GREAT! They provided explanations to me and resolved my issues very quickly over email! Bottomline: Its a great idea to make your outlets customizable. I really like the control and the information you can get from the smart modules. Some small things are that the software sometimes lags communications with the Smart Module, so that you might need to send commands twice to turn something on/off. Biggest challenge is the cost as you need to buy the smart module and the receptacle outlet separately. I would recommend that they bundle more at least the WiFi controller so that the smart outlet really is smart when you get it. Overall, I like the control, the information, not too difficult to setup and I think the outlets look great! Update after ~1 week of usage: Theres a reset button on the Smart Insert that you push to do certain things like reset and detection. However, when plugging in a charger on the top socket that hangs downward it will hit the reset button. You just need to plug it into the bottom charger, but you might have some charging adapters that interfere with the reset button. Thats really been my only usage problem thus far as the power usage data has been interesting. Update after ~1 month of usage: with the USB insert that I purchased, the connection between the outlet and the insert isnt as solid as I would like in a standalone USB outlet. So, if you have a snug fit on the USB port connector insert and when you attempt to remove the cable thats been inserted, the USB insert module feels loose as you extract the USB cable. Doesnt feel solid enough.

I love the flexibility of the Swidget. It’s easy to install and set up and the inserts are simple to swap out. I look forward to development of more inserts and plan on purchasing more.