T Phael Black Digitizer Repair Kit for iPad 9.7 2018 iPad 6 6th Gen A1893 A1954 Touch Screen Digitizer Replacement (Without Home Button) +Pre-Installed Adhesive + Tools

Excellent product!

Fast speed so easy to install with it

Screen chipped off of n the corner after few days of usage.

Packaged well as always! Adhesive isnt that great though!

This thing is just awful. Once all of the cables were reconnected I tested to validate it was working prior to exposing the adhesive, all seemed well. Unfortunately once it was adhered to the ipad there was no longer response to touch. Requested a new one be sent, and in removing the first one I could see the ribbon cable actually detached from the digitalizer, and also the whole digitizer broke into a ton of little pieces when removing, unlike the OEM. It gets worse - a few days after the second one is installed the touch response just didn’t feel quite right. Turns out I have a 1-2 inch dead spot right across the entire middle of the screen. Still living with it to this day. Icing on the cake is this - a month or so after installing the second replacement, I get an email stating I will be charged for the replacement if the original order wasn’t returned. As I mentioned it broke into so many tiny shards it went into the trash without 2nd thoughts. So not only did I pay for 2 of these, But I am also left with a massive dead spot right across the center of my screen. .

Cracked right after install. Did not drop, hit or impact it in any way. Very cheap material

Not bad for the money. Original was better,,but without an expensive Apple repair this is very acceptable.

I recommend a screen with the home button Installed. For me its a difficultly install.

Taking old screen of was a real pain! This product replacement was easy to install. Very happy.

1st screen had 2 horizontal dead spots. 2nd screen also had 2 horizontal dead spots (different zones). It has no insulation on the digitizer so assuming you get a screen that works, will need to insulate with some kapton tape. Didn’t get to check the adhesive since I checked the screen prior to final reassembly.