T Phael Black Touch Screen Digitizer for Samsung Galaxy Tab A 10.1 - Glass Replacement Parts for T580 T585 SM-T580 SM-T585 2016 (Not Include LCD) with Tools Kit + Pre-Installed Adhesive

This would have been a little bit better. If the adhesion was actually on the product I purchased.

*UPDATE*After a trip from SC to MD, the tablet and digitizer are working fine. Nearly as good as the original! I would certainly buy this again! I started, then cancelled, a return. The tablet is packaged extremely well! It would be a 5 star rating except that the bottom 1/4 of the touchscreen only reacts with an excessive amount of force. Such that you can see the led bending. I have tried calibration tools and many online troubleshooting guides and just cant get it to work correctly. I want give it 5 stars but cant.

Missing pieces.

Installed well

Worked as advertized

Screen works great once you get it installed. I have T580 and YouTube has some good videos on how to remove the old screen and install the new one . However what I wasnt expecting was the cut out for the home screen button on new screen to be a nanometer too small for the button to operate without getting stuck in the new glass, I attempted to wiggle it free and the new glass cracked.... :-( So I had to order another screen, when I got the second screen I took the button off and checked to see if it fit first and discovered the same problem. I had to file the edges of the push button down with small gauge file to get it fit inside the cutout. Once I ensured it fit, it easily went back together and now works fine. But beware of this if you decide to go this route to replace your screen.

It’s a lot harder than the videos look. Be very careful when taking off the back and old screen. I might recommend just buying the one that comes with the LCD inside as well

Tablet

This has every thing needed to replace the touch screen on a Galaxy Tab A

I was able to replace the digitizer on my tablet. The screen was fine, so replacing the digitizer was all that was needed. Removing the broken glass was a pain. After cleaning off shards of the old glass from the rim, the new digitizer went on relatively easily. It was much cheaper than taking it to a repair shop.