Tear Away Machine Embroidery Stabilizer Backing 8x8 - 100 Precut Sheets - Medium Weight 1.8 oz- Fits 4x4 and 6x6 Hoops
-
Brandi
> 3 dayWhen I got & opened this stabilizer I immediately checked my order to make sure I ordered the right thing. It’s labeled medium weight but be aware it’s thick and super stiff. I still wonder if I got a roll of heavyweight that was mis-labeled. I kept it figuring I’d use it anyway, but it’s just too heavy for what I’m doing. If that’s what you’re looking for then this is a good quality stabilizer, but if you’re looking for something between no-show and card stock then this might not be for you. :)
-
Nastassia Simpson
> 3 dayPretty good
-
Megan
> 3 dayI have a lot of waste with these, but honestly it’s worth it to me for the convenience… very sturdy and easy to use!
-
sunnyhat
> 3 dayThe weight is perfect for use for many of my machine embroidery projects. Quality is quite good
-
Ralph Furlong
> 3 dayI needed a stabilizer to use for embroidery with my Brother SE700 machine. So, when I found these I decided to order them and try them. 1. They are plenty large enough for the work I am doing with this machine. 2. They seperate as they should when done. Much easier to do a tear off than to try and trim with Sisson’s. 3. appears to be good quality and good value for money spent. I am happy with these and i would recommend them.
-
Susan Christine Young
> 3 dayPerfect
-
Michael W Riggs
> 3 daySo far this stabilizer has worked well for me. Using it primarily on towels but believe it will work fine anywhere a medium weight tearaway is called for.
-
Drew Friesen MD
> 3 dayawesome product good size
-
kerry cruze
> 3 dayGreat product
-
sewingmommy
Greater than one weekThis stabilizer worked great on my very 1st project.
How to Choose the Right Type of Embroidery Stabilizer for Your Fabric?
A stabilizer used to support the fabric during stitching to avoid the puckering and stretching is an essential for machine embroidery. Generally, stabilizers are classified as cut away, tear away, wash away. Here we will direct you to choose the proper stabilizer for your fabric and design among New brothread machine embroidery stabilizers.
Tear Away Embroidery (Medium Weight 1.8oz)
Tear away stabilizers are used when you wish to remove most of the excess stabilizer from the back of the project after embroidery.
It was recommended to be used on woven fabrics that have no stretch like quilted fabrics, 100 percent cotton, poly cotton fabrics, linen, vinyl, leather...
Cut Away Embroidery (Medium Weight 2.5oz)
Cut away stabilizer must be removed by cutting it away and the rest behind the stitch will remain on the fabric for the life of the design.
Cut away stabilizer is considered the most stable stabilizer.
It is typically recommended for unstable and stretchy fabric such as knits and high-stitch count design.
Wash Away Embroidery Stabilizer (Light Weight 1.5oz)
If your project requires no traces of the stabilizer to be left after embroidery, you must use a wash away stabilizer.
The strength of support offered by a wash away stabilizer is significantly less than cut away or tear away stabilizers.
Wash away embroidery stabilizer is recommended for lightweight fabric and Free Standing Lace.
No Show Mesh Embroidery Stabilizer (Light Weight 1.8oz)
No Show Mesh is also a kind of cutaway embroidery stabilizer which will remain forever fixed to your fabric but it is sheer and semi-transparent which is not for very heavy design.
No show mesh stabilizer is recommended for light colored fabrics.
It is extremely soft for baby garment and some fabric when soft is a very important consideration.
Water Soluble Topping Film (Light Weight 25Mircon))
Water Soluble Toppings are used only on the top of the fabric to control the nap of the fabric. It is best used on napped fabrics such as towels, knits, velvets, or velveteens to prevent the stitch sinking into fabric. They are too lightweight to be used as the backing stabilizer.
Fusible Iron On Embroidery Stabilizer (Light&Medium Weight)
Fusible Iron On stabilizer has a side with shiny coating which can be ironed to the wrong side to the fabric, so it can be fix to the fabric without a hoop.
Using Fusible Iron On stabilizer will prevent stretching of the fabric during the hooping process.
Black Machine Embroidery Stabilizer Backing
Black embroidery stabilizer is very useful on similarly colored garments or fabrics.
New brothread supply 3 kinds of black embroidery stabilizer: black cut away, black tear away, black no show mesh.
Sticky Self-Adhesive Tear Away Embroidery Stabilizer Backing
Sticky Tear Away Embroidery Stabilizer is a self-adhesive tear away embroidery stabilizer which is very ideal to use on fabrics that can’t be hooped or too small to fit in a hoop. Our sticky tear away embroidery stabilizer can be torn away easily yet provides adequate stability, leaving no tears and residue.
New brothread Machine Embroidery Stabilizer Series
|
|
|
|
|
|---|---|---|---|
Cut Away Embroidery Stabilizers
|
Tear Away Embroidery Stabilizers
|
Wash Away Embroidery Stabilizers
|
No Show Mesh Embroidery Stabilizers
|
|
|
|
|
|
|
|---|---|---|---|---|---|
| Cut Away Embroidery Stabilizer | Tear Away Embroidery Stabilizer | Wash Away Embroidery Stabilizer | No Show Mesh Embroidery Stabilizer | Fusible Iron On Embroidery Stabilizer | |
| Cut Away Embroidery Stabilizer | Tear Away Embroidery Stabilizer | Wash Away Embroidery Stabilizer | No Show Mesh Embroidery Stabilizer | Fusible Iron On Embroidery Stabilizer |