Thermalright Intel 12th/13th Generation LGA1700 Anti-Bending Buckle,CPU Stress Bending Correction Fixer, Curved Pressure Plate,Fully Fitted and Fixed Without Trace Installation (Black)
-
Kevin L. Greer
> 3 dayThis thing is so simple to install . Not expensive, but works like a charm.
-
SkoryJ
> 3 dayI didn’t notice a change to my thermals, but it makes my install look cleaner
-
Tim
> 3 dayRather easy to install, I removed the motherboard from the case, and removed all my RAM. It might be doable without taking the motherboard out of the case but I didnt want to try it.
-
audiom3
> 3 dayThis is my first build in 4.5 years, so this time around I wanted to do tons of research. Im installing a CPU water cooler for the first time ever and researching that a fair amount led me to these CPU brackets. Ive never been satisfied with the cheezy, light weight CPU brackets/fasteners which come standad on MBs. This seemed like a valuable asset for just $14. Im running a 13th Gen Intel on an MSI Z690 ACE MB. As you can see from the pic, the fit looks very clean and the aluminum bracket is well machined. I do not know if temps will be lowered vs the stock guillotine bracket but it sure holds the Intel in place far better. And that can only be good.
-
COUROSH DAWOODI
> 3 dayOnce I saw a video on this item, I decided to purchase one. It is as good, if not better than the name-brand one. Dont waste your money getting a name-brand one. This one does a great job keeping the CPU flat and has proper contact wth your cooling device.
-
73
> 3 dayIf you have a 12th or 13th gen processor, this is a must have. I installed this frame on two different computers and it dropped temps by at least 8 degrees on each. Install is super easy if you follow the steps in the Gamers Nexus youtube video.
-
Evan
> 3 dayThis product didnt reduce the temps too much, maybe 5C at full load. However, I got this product for the longevity of the CPU health. This way I can guarantee CPU bend doesnt happen over time.
-
Jonathan
> 3 dayLiterally dropped temps by 20c just by adding this to my i5 12600k.
-
Constantine
> 3 dayLook I realize Thermal Grizzly basically thought of these as a solution for the 1700 socket bend but they’re super expensive and hard to find in the States. And yes, there are even some builders that believe these contact frames are just a trend and are nothing more than a security blanket for a nonissue. And in same cases that’s absolutely true. Some CPUs IHS are perfectly fine with the socket bend I had 4 that were completely fine with or without the contact frame. But after 15 builds with extreme socket bend making for poor contact with heatsinks I can say this helps more often than not. This contact frame has lowered temps by upwards of 8C on my builds and yes I tested each one. So yes, in my professional opinion Intel created a problem, never addressed it and these are the best solution, especially for anything Core i7 and up. The fact that Thermal Right created these at such a reasonable price and are indeed just as effective as Thermal Grizzly’s (check Gamers Nexus) seems too good to be true, but as I’ve said I’ve used these on 15 builds and they’re worth every penny.
-
Justin
> 3 dayI used this on an Intel Core i7-13700K with an ARCTIC Liquid Freezer II 420 for cooling. With the stock frame a few of the cores kept spiking over 100C under load, forcing them to thermally throttle. Since the same cores were overheating every time, it seemed like the CPU wasnt properly mating with the cooler, which is exactly what this product is designed to fix.