Timber Wolf Bandsaw Blade 1/4 x 93-1/2, 6 TPI

This blade works beyond my expectations. I bought a 1/4 inch blade for close work but tried it for re-sawing and it worked faultlessly. Previously used a 3/4 blade for that and this equals or betters that. The cut side is much smoother (it is a bandsaw though) than other blades Ive used. Just broke it after almost 2 years while re-sawing hard maple, it was getting dull anyway.

Being a frugal (cheap) person, Ive been using the blade that came with my Grizzly 14 bandsaw for several years now. It has always been adequate, nothing more, nothing less. But I got frustrated with the old blade and as it got older and and started to burn the wood, I finally decided to upgrade. Wow... I installed this Timber Wolf blade and I was just astounded how much better this saw was. It cuts faster, smoother and makes tight cuts easy. If I had known what a difference this would be, I would bought this blade as soon as I bought the saw. Make your life better, buy this blade.

I realize that factory/stock blades arent any good, but the one on my Porter-Cable 14 bandsaw was doing okay for me with softer woods like poplar. I finally had to cut some 5/4 Soft Maple, and that was where it just wouldnt continue any more. I purchased this Timber Wolf blade based on the reviews Ive read, and to be honest I didnt truly think it would be THAT good over the old one. Boy was I wrong. This blade sliced through the Soft Maple like it was butter. It cut very cleanly, didnt wander and is much quieter while cutting. I also cut some poplar to give me a true comparison with the old blade and the difference was still night and day. When I need a different size or to replace this one when it wears out, the next blade I buy will be a Timber Wolf.

Im fairly new to bandsaws but I knew enough not to use the setup blade that they included. I had purchased my original replacement blades from the local big box store and bough the best they had of the very limited selection. THEY DO NOT HOLD A CANDLE TO THESE. Im serious the difference is night and day. Follow the instruction on the package and set them up using the flutter method because these really do require WAY less tension than the usual blades. The cut is smooth and effortless with a narrow kerf and even the noise is reduced. The price seems high compared to other blades but it is worth every penny.

Just like my last one. It works fine.

This blade is a very nice blade. Cuts well. Especially liked the tensioning instructions that some with the Timber Wolf blades.

These Timber Wolf band saw blades stay sharp and are incredibly durable which makes them a very good value.

i use a 14 band saw... until now i had been using blades that i picked up at a local big box store...i recently built a couple of tables that had many curves and intricacies...i decided that a new saw blade was in order so i ordered a timber wolf saw on amazon...it was like my band saw turned into the worlds premium saw. this blade is great...it was a few bucks more than ive spent on similar blade but worth every cent..cuts smooth fast and many of the component really needed no sanding...i will never buy another brand...thanks for a great blade...

I have used Timber Wolf blades for years. The difference between these blades and stock or cheaper blades is night and day - and these are not all that expensive. Will give an old band saw new life. I replaced an old 14 craftsman with a 10 saw (mistake but thats another story). The saw was a mess. After a year or two I replaced all my blades with Timber Wolf. Could not believe the difference. Ran that saw until the duct tape wore out. Now have a Delta 14. Run the stock blade while you wait on your Timber Wolf. Once you change out, you will be amazed.

This is very good quality and lasts well.