TIMKEN 6202-ZZ, 2pack,Double Metal Seal Bearings 15x35x11mm, Pre-Lubricated and Stable Performance and Cost Effective, Deep Groove Ball Bearings.

Being that 6202 is a common size, I have used these bearings in two different projects. First, restoration of an old drill press. Second, rebuilding a ceiling fan motor. You can always save a few dollars and get an off-brand. However, both of these projects required a LOT of effort to disassemble and reassemble. The last thing I want to do is to have to tear it down again because the bearings fail pre-maturely. If you are making something like jigs or equipment that sees low use or has exposed bearings, feel free to save your money. Pros: -Well machined to specs -Smooth and tight -Pre-packed with grease -Individually wrapped to keep clean and rust-free Cons: -A little more money than off-brands -Unknown country of origin -Model info is etched very small on side of inner race

I replace a couple of bearings on my bandsaw the went bad. These were a perfect replacement fit. No problems or issues with these bearings whatsoever. They seem to be holding up well.

Used these to replace original bearings on a harbor freight bench grinder that wore out after several years of use. I have used Timken bearings on many things with good results. These bearings however are getting noisy after less than an hours use. They sound like a dry bearing with little or no grease in them. I am going to have to replace them with a different brand.

Fast shipping, used in rebuilding jointer.

Good quality Timken product. Perfect specs for my Ryobi belt sander.

Had to replace the first install. Pressed against outer race. Used correct size tube , pressed in inner race only, on replacement resolved issue.

Perfect fit. Brought a tired old bench grinder back to life.

I got these for bandsaw guides. They are well priced for a good brand name.

Bearings are a high grade part, good price for 2 of them

These came reasonably quick, and they fit just like they shouldve and were protected well in the packaging. They allowed me to bring up a customers Summa Cutter and no issues with tolerances or durability. Its typical Timken...