TIMKEN 6202-ZZ, 2pack,Double Metal Seal Bearings 15x35x11mm, Pre-Lubricated and Stable Performance and Cost Effective, Deep Groove Ball Bearings.

I used these while refurbishing a machine I have. It’s great to be able to get quality bearings at a reasonable price.

Used these to replace original bearings on a harbor freight bench grinder that wore out after several years of use. I have used Timken bearings on many things with good results. These bearings however are getting noisy after less than an hours use. They sound like a dry bearing with little or no grease in them. I am going to have to replace them with a different brand.

Perfect fit. Brought a tired old bench grinder back to life.

These were exactly what I needed for my project. Was impressed by the appropriate packaging - probably would protect the bearings for 100s of years.

Good quality Timken product. Perfect specs for my Ryobi belt sander.

I have a 30 year old Jet JBS 14CS bandsaw and the upper wheel bearings were shot. I removed the old bearings which were “open bearings” meaning the ball bearings are exposed and taped these new Timken bearings in place (see the photos). Easy fix for me, the Timkens worked great, eliminated the worn bearing noise and my saw blade tracks much smoother. I had the proper tools to pull the old bearings - you might need those as well depending on your circumstances and application. Hope that helps!

Being that 6202 is a common size, I have used these bearings in two different projects. First, restoration of an old drill press. Second, rebuilding a ceiling fan motor. You can always save a few dollars and get an off-brand. However, both of these projects required a LOT of effort to disassemble and reassemble. The last thing I want to do is to have to tear it down again because the bearings fail pre-maturely. If you are making something like jigs or equipment that sees low use or has exposed bearings, feel free to save your money. Pros: -Well machined to specs -Smooth and tight -Pre-packed with grease -Individually wrapped to keep clean and rust-free Cons: -A little more money than off-brands -Unknown country of origin -Model info is etched very small on side of inner race

These came reasonably quick, and they fit just like they shouldve and were protected well in the packaging. They allowed me to bring up a customers Summa Cutter and no issues with tolerances or durability. Its typical Timken...

Perfect fit

I replace a couple of bearings on my bandsaw the went bad. These were a perfect replacement fit. No problems or issues with these bearings whatsoever. They seem to be holding up well.