Timken 6203-2RSC3 6203-2RS Deep Groove Ball Bearing 17x40x12mm
-
Bob Quinn
> 24 hourPool sweeper pump was screaming with a bad bearing. Pulled it apart and ordered these bearings which were priced very reasonably. Bearings were very well packaged and a perfect fit. They arrived in two days as promised. Pump is now running perfect and very quietly. Very happy with purchase and seller.
-
Ken Blaisdell
> 24 hourI was able to save my drill-press motor with this $10 bearing, saving myself at least $150 on a new motor!
-
Don
> 24 houras expected
-
Troy Huckendubler
> 24 hourPut these in my table saw with great results
-
Trevor Heidenreich
> 24 hourreplaced the bearing in my is300 accessory belt tensioner pully. saved some $
-
Larry
> 24 hourI ordered the bearing after checking out reviews on the internet. The bearing replaced a bearing in my table saw motor that froze up. It fit exactly and it looks to be of high quality. Smooth. Longevity is unknown of course at this time. Replacement was fairly easy if you take your time, and especially if you have the right jig to pull the old bearing off and install the new one. Find someone you know with a bearing puller.
-
Richard Noble
> 24 hourBearing fit as expected. Had mower up and running in 15 Minutes after installing new bearing.
-
Martha3065
> 24 hourJD X500 riding lawn tractor drive pulley assembly is not serviceable. JD wants to sell the entire assembly at around $80 (part cost only) and does not sell the bearings separately. These fit perfectly. Remove the old ones, put these in, reassemble deck and youre good to go. Save yourself some money if you are handy.
-
kupy
> 24 hourUsed to replace the bearing in a Toro mower FWD transmission. Installed using a socket and so far works fine.
-
Karl N.
> 24 hourI used this 6203-2RS bearing to replace the 6203-Z bearing on the motor of our treadmill. I replaced both the front and rear bearings on the motor shaft, as the motor had gotten very loud when in use. With the new bearings in place, the treadmill motor is MUCH quieter, and working great!