TOFL Pipe Tool - Great For Copper Pipes, A Reamer, And Deburring Tool, An Inner And Outer Reamer For Soft Metals And PVC Rigid Plastic Tubing 3/16 to 1-1/2-inch (6 Mm To 40 Mm) (Red)

Was expecting something bigger

Maybe buy a better reamer.

Very badly made, it looks so cheap.

Worked as described, I would purchase again if needed

Tried this new reamer/chamfer on 1/2 and 3/4 pipe; as mentioned in the headline. Worked good on all 3 types of pipe; inside and outside edges. It took some effort to work the tool on the pipe; was not like cutting butter. My main concert was durability; how long will the blades stay sharp? Tried it on ends that were cut with a hacksaw and pipe cutter. Worked the best on pipe cutter ends.

It does the job well.

I purchased for a small home project. They are too cheaply made. I threw them away and bought new tool at Home Depot. Do not purchase this item.

Didnt really work that great

Plastic tool with inadequate cutting blades. Would not deburr my 1 copper water lines at all, even with lots of pressure and lots of turning. Had to resort to the regular deburring tool. I do not recommend this cheaply made tool. It may be suitable for PVC tubing but not large copper tubing.

Cheap made