Toprema Mining Rig Frame for 6/8 GPU Steel Open Air Miner Rig Case Rack for Crypto Coin Currency Bitcoin ETH Ethereum ZCash Mining Accessories Tools - Frame ONLY
-
Allice
> 24 hourThe frame is very easy to set up. You can feel how sturdy it is! I like two openings at the bottom. They are perfect locations for fans. It comes with easy assemble instructions. I spent no longer than 30 minutes to install everything. Screw holes are precise, pieces are sturdy. Generally, it is a good frame for mining.
-
Stacy
> 24 hourThere is 4 of the hex screws missing. You can barely look at the pictures in the instructions. And they don’t say much. Do not buy
-
Dr. Lilly Koepp IV
> 24 hourEquipped with that good good foundational support, make you say good golly!
-
Stacy
> 24 hourThere is 4 of the hex screws missing. You can barely look at the pictures in the instructions. And they don’t say much. Do not buy
-
tony santos
> 24 hourOk
-
Allice
> 24 hourThe frame is very easy to set up. You can feel how sturdy it is! I like two openings at the bottom. They are perfect locations for fans. It comes with easy assemble instructions. I spent no longer than 30 minutes to install everything. Screw holes are precise, pieces are sturdy. Generally, it is a good frame for mining.
-
Emmanuel O'Hara I
> 24 hourEquipped with that good good foundational support, make you say good golly!
-
Hunter McQuade
> 24 houreasy and good
-
Hunter McQuade
> 24 houreasy and good
-
tony santos
> 24 hourOk
Thank you for choosing Toprema Mining Rig Frame
Are you building or want to build a mining rig? Are you looking for a frame for it? Come and buy this mining rig frame, with an open air design, optimized airflow system, perfect layout, durable and study structure, aesthetic surface, it will not only keep your cryptocurrency mining hardware clean and will organized, but also keep them cool, quiet and have a better performance!
Specification:
- Material: Black Powder Coated Steel (Bottom plate 0.04 inch / 1 mm Steel, Fixing bracket 0.06 inch / 1.5 mm Steel)
- Assembled Frame Size: 23.82 x 10.55 x 9.45 inch / 605x 268x 240 mm (L x W x H)
- Support Motherboard Size: Max. 12 x 9.65 inch / 305 x 245 mm
- Support Graphics Card: Support 6GPU / 8GPU, 8 card spacing is 2.95 inch / 75 mm. The length of the graphics card is unlimited.
- Support CPU Radiator Max. Height: 3.74 inch / 95 mm
- Support Power Supply: Single ATX power supply, extended power supply, the length should be less than 9.84 inch / 250 mm
- Support Storage Device: SSD x 2 + HDD x 2
- Support Fan: 4.72 inch / 120 mm x 5pcs fans
Package includes:
- 1 x Mining Rig Frame (Needs Assembly)
- 1 x Set of Mounting Screws
- 1 x Power Switch
- 1 x Padding Strip
- 1 x User Manual
|
|
|
|
|
|---|---|---|---|
Solid QualityThick Steel makes this frame study and durable, fully protecting your GPUs and electronic equipment from damage. The quality Black Powder Coated Surface makes it stylish, smooth, no sharp edges and scratch resistant. |
Super Cooling DesignProfessional OPEN AIR FRAME keep your mining hardware cool, quiet and have a better performance! With Two Openings on the bottom plate and Slots for Fans (fans not included) for better heat dissipation. |
Precise Pre-Drilled Screw HolesPrecise screw holes make it easy to assemble the frame and complete the layout of mining equipment. It also makes this frame match various types of motherboards, SSDs, and HDDs. |
More AccessoriesComes with a Padding Strip so the bottom of the GPU"s / risers have a good place to rest and can reduce the noise generated by the graphics card during operation. A Power Switch is also included for convenient power on. With a PSU fixer for securing the power supply, keeping the PSU firmly in place. |
Easy Assembly
Step 1: Install the Hex Spacer Standoffs according to the corresponding holes of the motherboard and the PSU fixer to the bottom plate (Hex screw used).
Step 2: Install the higher bracket (Hex screws used).
Step 3: Install the lower bracket (Hex screws used).
Step 4: Install the left and right support bar (Hex screws used).
Step 5: Install the middle graphics card / riser rest bar (Hex screws used) and put the padding strip on. Then you are ready to configure your mining hardware.
|
|
|
|
|---|---|---|---|
| for 8 GPU | for 6 GPU | for 12 GPU | |
| Assembled Frame Size | 23.82 x 10.55 x 9.45 inch / 605x 268x 240 mm (L x W x H) | 19.69 x 10.55 x 9.45 inch / 500 x 268 x 240 mm (L x W x H) | 28.54 x 10.55 x 9.45 inch / 725 x 268 x 240 mm (L x W x H) |
| Material | Black Powder Coated Steel | Black Powder Coated Steel | Black Powder Coated Steel |
| Support Power Supply | Single ATX Power Supply | Single ATX Power Supply | Dual ATX Power Supply |
| Support Storage Device | SSD x 2 + HDD x 2 | SSD x 2 + HDD x 1 | SSD x 2 + HDD x 2 |
| Support Fan | 5 x 4.72 inch/ 120 mm Fan | 4 x 4.72 inch/ 120 mm Fan | 6 x 4.72 inch/ 120 mm Fan |