









Tripp Lite Cat6 Gigabit Molded Patch Cable (RJ45 Right Angle M to RJ45 M) Blue, 5-ft.(N204-005-BL-RA)
-
Mick Argo
> 3 dayI needed it for a tight fit in an enclosure. It is super long and they dont make any shorter patch cables with 90 degrees that I saw. Luckily, I was able to just cut it to fit and put a Cat6 end on it again and it works perfect and is just the right length
-
K. McDonald
> 3 dayThis has the lowest-profile 90-degree connector of any otherwise comparable product that I have found. Works well behind a bookcase that, if it wasnt for the baseboard, could be flat against the wall.
-
GrogMeister
> 3 dayThis is indispensable if you are mounting a TV to the wall, and it has an ethernet port that extends straight back from the back of the TV, as some do! (Why, I dont know) This creates a problem where the other cables extend out sideways, allowing for a flush fit, but a regular ethernet cable requires too much clearance away from the wall. This cable solves that problem.
-
Fred
> 3 dayEthernet cables have a minimum bend radius, which get larger based on the type of cable, Cat 5, 5e, or 6. Our dresser such out several inches from the wall to keep the cable from getting kinked. With this plug, we can push the dresser almost against the wall with no bandwidth issue.
-
S. Hunt
> 3 dayGreat cable. Happy with the quality. Would buy again.
-
Terminator
> 3 dayThis is perfect for my LG 4K tv that is mounted on the wall. Before the regular Ethernet cable would be crushed against the wall since it plugs in the back of the tv. Now with this cable I dont have to worry about it getting crushed and possibly ripping apart.
-
Terrence
> 3 dayI Use this cable with my laptop. It doesnt put a strain on the cable or the connector on my laptop
-
Boomer
> 3 dayWorked perfect for a place I had a. Lear an early issue with a drawer. Also kept it looking much nicer.
-
Nick
> 3 dayGirlfriend wanted the bedroom tv and media center computer moved away from where I installed the Ethernet wall plate. So, instead of having a wire extending way out into the room, I found this 90 deg bend and connected it today. Looks nice, lays against the wall well and falls cleanly to the floor. As expected, has reduced the risk of tripping over the wire and/or ripping it from the wall.
-
ICG Computer
> 3 daygood