VEKIR Touch Function with Glass Lens Screen for Samsung Galaxy Tab E 9.6 SM-T560 T560(Black)[9.6 INCH]

Like the original and easy to install.

Put it on my dads Samsung tab E 9.6” screen. Took me all of about 10 minutes to do. Best way to do it is to pry up from the bottom on each corner and then just get your fingers under it and pry it the rest of the way out (the case that is) . If you do it in the center of the bottom you could ruin the hardware. I watched a YouTube video and heated up the screen with a hair dryer for like a minute. That was enough to get the screen off. I did get an additional big flathead screwdriver to pry the case apart, and used the blue plastic to get under the screen to take it off. Good luck! No more cracked screen for us!

This is the 2nd screen Ive purchased. Ill buy a 3rd time if neccessary.

This product is top quality.

Good quality, all tools to work on it included and easy to install, thanks

RE: Samsung Tab E SMT560NU. Attempting to repair this for a friend after another individual had disassembled it. Said individual should have watched a few HowTo videos first. The back was still attached to the circuit board. The Lens Screen (as it is called here) cable was damaged. The battery is so swollen it is no longer possible to fit the Glass screen atop the circuit board. So, first I ordered this Lens Screen. Attached the cable. Works fine. Thats all you need to know! Looks like Ill need to order a new battery and hope it is a flat one!! Remember the Tin Man in the Wizard of Oz movie? Disassembled while being cleaned. This tablet is similarly disassembled - working fine while its parts are splayed about. If I have to do a similar repair, I will certainly use this vendor again.

For Samsung Galaxy Tab E 9.6 (Barnes and Noble Nook) Came with tools, but I did not need to use any of it. First, I watched a couple of vids on youtube. I could not figure out how to properly connect the flex connector to the tablet, had to watch a particular youtube vid several times, then realizing that the connector on the tablet, had a tiny flip locking tab, barely able to see with my eyes, even with a close up shot from my phone, can actually flip open and close. First open the flip tab on the tablet, if you insert the flex connector into the tablet connector properly and close the flip tab, it should feel slightly snug to close and lock it down, after that, I just used some blue painters tape over the flip tab to make sure it will stay close from any vibration. First step is, just like the manufacturer has stated, do not remove the broken screen yet, but remove the old flex connector and connect the screen replacement flex connector to test and make sure the new screen works, dont have to remove the protective plastic sheet on the replacement screen to test, once you confirm that it works, then go ahead an start the actual replacement. Before connecting the flex connector from the new screen replacement, use a lint free swab/pad with rubbing alcohol and clean the flex connector, the part that makes contact with the connector on the tablet and make sure its dry before connecting. Pros: - Came with a bunch of tools(but I did not need them) - Essentially very easy to install - Works perfectly Cons: It comes with 3M adhesive tape, which its kind of a PITA to put the on the tablet yourself(not on the screen replacement). Some other screen protector already has the adhesive on the new screen, but not this one. Just make sure you put the adhesive around each corners also to get a nice seal. Conclusion: No regret buying and installing it myself within 1 hr, better than paying $50 for some so called professionally to install it for you. >>UPDATE 7/19/2020 See image, this is the flip locking tab I was referring to. With my messed up eyes, I first did not realize that this actually can flip open and close to lock it down. In this image, its in the open position. >>UPDATE 8/2/2020 I initially gave it 5 stars. Prior to installing it completely, I did connect it to the tablet and tested the touch screen, it seemed to work fine, such as dragging an icon around, maybe I did not test it thoroughly enough. After fully installing it, about a few days after installation, then I noticed that the far right side of the screen does not respond. hence I change my initial 5 stars to 2. >>UPDATE 8/7/2020 Now, the whole screen does not work at all. Now, I changed from 2 stars to 1.

Some genius hot glued my moms tablet shut and the battery died so I broke the touch screen while trying to open it. This part worked to fix it I also put a new battery in it works like new. Even has the Samsung on the top so you cant tell its not original.

My only problem in this product is it is difficult to put the adhesive. besides that everything is great and the screen is durable It would be nice if the adhesive is already applied in the edges.

I did A by the book install and 5 days later the screen fell off and tore the connector. I notified amazon, A replacement was sent out immediately along with A free return label. Installed second one and 2 weeks later still going strong. Excellent support! Thanks much.