The first thing to know about this label printer is that it doesnt come with any trial labels - be sure to buy some in addition to this! There are many available on Amazon and Im using 4x6 labels. INITIAL SETUP This was relatively easy to setup. It comes with a nice flash drive with the drivers and manual on it, so you dont have to search online for it. Install on our Windows 11 machine went smoothly and there were no problems with our machine locating the printer. The 4x6 label roll that we purchased was easily placed into the hopper and the machine automatically aligned itself (it wasted 2 labels doing so, but labels arent expensive). INITIAL USE Theres a bit of trial and error to get the print size right. My first label had the label off center and the print was way too big for the label (or the label was too small, depending on how you look at it). I double-checked the label dimensions and made sure the printer options matched the label, and they did. Without taking you through everything I tried, my tip is to simply select 4x6 as your label size and then print at 90%. When I did that, it was perfect. IMPRESSIONS The label is LIGHTNING fast. Ive never seen such a fast printer. ZZTT, done. The quality seems higher than our home printer that I have been using for shipping labels (using default quality settings). I dont see dithering, smudging, etc. The darkness is spot on. The stickiness of the labels seems pretty good. TBH, Id give this 4.5 stars for the small alignment issues that caused some initial headaches, but Im rounding up because Im very pleased with the print quality and performance. I hope it stands the test of time.

Horrible printer, prints fades, super complicated to install.

A big improvement over handwriting or single feeding a huge label thru a regular printer. The printer works well, prints clearly and works for all the shippers I use. I like that it is a thermal printer, so there will never be ink to worry about!

The software was awfully finicky and wasnt compatible with my MacBook despite advertising as such. It did work with my windows, but software seemed finicky. Was able to print a few test shipping labels but overall experience wasnt great. A bulky machine and not easy to get refills for the inside.

Good

I got this thermal label printer to test and review. I purchased a roll of thermal print label to use to test it. However, I have yet been able to figure the printer out. I hooked it up via the included USB cable to my computer which runs Windows 11. But not much is happening cause NO driver or software is included with the printer. So unless you have some experience and knowledge of this type of thing you are not able to plug-n-play with this setup. I will update this review if I figure out how to get this working properly. As is I can only give this a 3 Star under the assumption the product actually works - but unknown at this time.

This took me some time to get up and running so I had to phone a friend for help. I didn’t minus a star because I am not good at all with computers, that being said once he hooked it up for me it worked great. I needed this for making labels for some old vases and dishes I’m selling. And this worked perfectly. Once hooked up it is easy to use.

This is just what I needed. Helped to print the shipping label directly instead print on the plain paper and tape it on to the package. The print quality is OK, it depends on the label you used. Overall happy with it.

Once it gets going this Vretti label prints fast. That is by far its best feature. But first things first. The printer is 6 3/4 inches wide, 6 1/4 inches tall and 8 1/4 inches deep. It is definitely larger than I thought it would be, but that is for good reason as most of the volume allows a sizable roll of labels to be installed inside. It weighs in at a hefty 3 pounds without a roll of labels inside. Along with the printer, the box contains: ! External power brick. External power supplies are annoying. I would have preferred a label printer that is powered via USB and barring that one that has a built-in power supply to avoid having to deal with a sizable brick. ! 4 foot USB-A to USB-B cable. The printer is somewhat old school in that it has a USB-B port. A modern device should be USB-C based, IMO. I did not use this cable as I have a USB-C to USB-B cable on hand to use with my Mac. ! Instruction manual. The most important information in the manual related to function of the single button on top of the printer. ! Sample printed labels. The sample is useful for getting a quick understanding of the quality of the output, which IMO is quite high. I don’t know what the official DPI is but they look good and read well, that’s good enough for me. My complaint with the sample labels is that there are no additional unprinted sample labels included in the box. Unless you have labels on hand, you cannot put this printer to use right out of the box, even to test it. ! 1GB USB thumb drive. This drive contains the manual in PDF form, some guidance videos and printer drivers for Mac, Windows and Linux. That makes up only about 500MB of data on the 1GB drive! I appreciate that I can reformat and use this drive for other data now. Nice bonus. I do not have a roll of 4x6 labels on hand but I do have fanfold stock. Luckily this printer has a slot at the bock that allows external labels to be fed into it. With labels inserted as guided, holding down the feed button on the top of the printer initiate the calibration process that will result in the ejection of one or two unprinted, wasted labels. This is one area of complaint that I have. If you move the printer around with an external stack of labels, you will have to calibrate the printer each time, losing a label or two each time. If the printer is stationary or there is a roll of labels inside, recalibration is not necessary. IMO this printer works best with label rolls for this reason. I have a roll on order and will update this review if the experience is not as expected. The label guides allow labels up to a maximum width of 4.25 inches. Installing the driver for this printer is very straightforward using macOS Printers & Scanners settings page. On my Mac, with the driver installed the printer shows up as BARCODE 4B-2054L I do not have any professional shipping software installed on my Mac nor do I use a cloud host shipping applications. My process to print a label is not the most efficient but as I don’t print tons of labels that is fine. When I use a site like FedEx.com or UPS.com to generate a label, the label will inevitably be positioned for 8.5x11 paper and not in a 4x6 format. I preserve the label into PDF form and then screen capture the label into the macOS Preview app and print from there. Perhaps this printer integrates well into a shipping application workflow but I’m not able to test that. My use for the Vretti is 4x6 labels only. I am aware that this printer will work with labels of other sizes and widths. Once the printer gets printing, the label is spit out in a split second. I did not realize that a thermal printer of this nature can print so quickly so I am pleasantly surprised. Maybe that’s why it needs the external power source. One problem: I cannot get two labels to print in a row without the second label printing into the gap. The printer driver has a GapsHeight setting from 0 to 0.394 inches and while the actual labels have a 0.25 inch gap between them, setting GapsHeight even to 0.394 inches does not fix this issue. Perhaps if there was a larger setting like 0.5 inches I could get this to work right. Overall this is a decent label printer. My complaints are minor to not so minor, like the need for a power brick and wasting labels on calibration and inability to print two in a row without messing up the second one. I use this printer only occasionally and cannot verify if it can be a workhorse in a situation when shipping labels are constantly needed through the day. UPDATE: After printing just a few labels, I was temporarily not able to get it to work again. After turning it on, the LED blinks blue briefly, then blinks purple followed by rapid red and cycles with intermittent beeps thrown in. No matter what I did I could get the printer to reset. I left it off in frustration for a few minutes, turned it back on again and it went into ready state and I could print again. This is not confidence inspiring behavior. Docking another star for this.

Im surprised reading other reviews on this label printer. I found set up of the machine very easy, to the point I didnt need instructions. I purchased a roll of 4x6 shipping labels separately and was able to load them with ease. I feel the printer does a nice job of holding the roll in place as well as feeding the labels through smoothly. I agree with another reviewer that the quality of print could be greater but overall Im happy with the device and find its quite user friendly.