VViViD Air-Tint Matte Black Headlight/Tail Light Window Tint (17.98Inch x 60 Inch Large roll)

Have this product 4 out of 5 for ease of install because it takes some patience at first. I can see some people giving up. That being said, my second light took a fraction of the time. Heat it as you go and dont be afraid to pull it way back and heat it again. Got a quote to get my lights tinted professionally of $300. Spent less than $20.

The film is thick and strong. The adhesive is strong. The film has a slight texture and a non reflective matt surface. I used it on a relatively flat lens surface. (I did not cover headlight lens), I tried to apply it over the edge of the lens but the material was a little too stiff and did not stick well where it was bent over and around the corners. I was able to trim the film even with the edges of the lens so it worked well for my application. The film appears dark and slightly opaque but allows plenty of light thru when the turn light is on. I would recommend this product.

Product installed just fine, over stretching makes it have a gloss like appearance but had lots of working room before it got to that. It makes any light output turn to a soft lightbulb look. I got led bulbs in my car so it doesnt get more light output, seemed like my low beams looked like a drl Good product If you dont mind not seeing much about night

WARNING: this Matte tint is extremely dark and I wouldn’t recommend it for the headlights. After I installed it I switched it to the light smoke for visibility. At night the Matte was noticeably darker even with upgraded LED bulbs. Although they are dark they are the perfect color to blend fog lights and marker lights to black textured bumpers. I purchased all of their colored tints. Light Smoke, Dark Smoke, Matte, and all of the colored films. Each of them are extremely easy to use. They are very malleable after applying alittle heat. My main advice is to make sure to not touch the back on the vinyl as it will show fingerprints. I personally found this to be much easier and forgiving to install than vehicle vinyl. It could be based on the fact that it feel thicker than VVivids Premium vinyl.

I bought this to black out my headlights, taillights, and marker lights. I was hoping it would allow enough light through from the headlights, but that was not the case. After applying this to all lights, I waited until it was dark and took a short trip around the block. Even with my high beams on, my (normally very bright) headlights were barely able to let me see clearly. The lights were still plainly visible when illuminated from the outside, though. Got back home and pulled the film off of the headlights and left it on the other lights. The next day, I went out and got a better look at the film in the daylight. The photos shown on the listing are all in shadow; in direct sunlight, the film is very sparkly, like its been coated in glitter. Thats great if thats what youre looking for, but it wasnt for me. Got home from that trip and pulled it off of all the lights. Ive since ordered some of the dark smoke tint, and hopefully it will be more of what Im looking for.

Product was just as described. It went on and adhered easily…about 15 minutes per lens. A little patience, a hair dryer and a utility blade was all it took. The lights show up clearly through the vinyl too. I issues.

Was easier to install compared to their tints from this brand.

Absolutely love this vinyl. It’s easy to use as a dry application just squeegee and heat gun and go. Look clean and not jankie. I actually bout another already.

This is amazing. Installed this back in Jan 2021 and it’s still going strong and I live in Texas surely I didn’t think that the Texas heat would allow it to stay on but it’s still like I said going strong highly recommend.

Taillight