Welacer DTF Ink Premium 6x100ml Heat Transfer Ink Conversion Kit Refill for Epson L1800, R2400, L800, 1430, P400,P800,R2000,XP-15000 All DTF Printers,for DTF Film(White Cyan Magenta Yellow Black)

I bought the Welacer brand powder and DTF film to try with sublimation ink. I watched a multitude of videos and started testing. Most importantly, you can not follow the powder or film instructions. The preparation part of instructions don’t match up and they don’t work. The instructions say to melt the powder around 270-305 degrees. This did absolutely nothing. I moved on to testing what temperature works. To melt the powder on the film, I found the best end product results were achieved as follows: my printer was set for plain white paper, standard quality and I did end up using bi-directional printing, which adds more ink. You must practice with your printer. I was able to melt the powder evenly at an average of 350 degrees, but it took 5-6 minutes. I applied the transfer to fabric at 320 degrees and 15 seconds. I did a Luke warm peel. So, with that being said. You must plan on using up some film and powder to make it work for you. I found higher melt temperatures even at shorter times ended up with blotchy rubbery results. 1st photo is best results. It feels fantastic on the fabric. The second photo showed one of the better fails. Some of the fails were terribly blotchy.

These sheets do what theyre supposed to. But the sheets are obviously cut to size. Each sheet is a different size and uneven

Product works as it should however I almost threw it away. Product came in a thin cardboard fold like thing and I though it was part on the box to hold the bottom from separating until it fell out and there was a little sticker on it

Worked really well . I will order again

I havent had a clogged printer head since using this ink 100% buying again! The company needs to offer more sizes

Awsome product this the only brand I purchase it never let me down with the beautiful colors it produces with of course my great dye ink so the combination is like 2 peas in a pot together

Its so hard to tell which side is the right side and it is easy to waste materials by printing on the wrong side.

Love that we can use this to sublimate on cotton- just make sure any powder you use with it doesn’t stick to empty space.

I wanted to try this product to be able to sublimate on to cotton material. So far all images I print the printer roller runs through the ink and makes lines through the image. You also need to get DTF powder to use this paper. It is hard to tell what side is the side you print on, would be nice if it was clearly marked.