WINDFRD 1.5 Ball Fish Finder Mount, Medium Arm Marine Electronic Mount, Universal Mounting Plate with 1.5 inches / 38mm / C Size Ball Adapters, Compatible with Garmin, Lowrance, Humminbird and More
-
John P.
> 24 hourNice mount and seems to be as good or better than my RAM mounts
-
Julia N. Mote
> 24 hourThis is a solid well Made mount for any fish finder. I put a Garmin 106sv ultra that I use for live scope and the pre drilled holes line up perfectly.
-
Darryl Gustafson
> 24 hourI purchased this mount to put my Simrad GO9 XSE Chartplotter/Fishfinder on our new flats boat. The console had very little room to work with. This mount worked perfect and the holes in the mounting plate lined up perfect with no drilling required. Very happy with this purchase.
-
John T. Watson
> 24 hourWorked as expected
-
Ms. Calista Crist V
> 24 hourMy took a tap and threaded the holes I needed and was able to screw the bolt right into it. Perfect. I think these were great for my fish finders
-
Michael Shoopman
> 24 hourWas as advertised
-
Dennis D.
> 24 hourThe unit is a bit light for the chart plotter that I have 10 solix. it weighs app 8 lbs I have to use a rubber strap to help assist the unit from sagging I would not recommend this unit for plotters more then 5 lbs.
-
Jason
> 24 hourusing this on my kayak. have a hobie 360 and mounted a lowrance hds live 9 fish finder without any problems. dosent slip one bit.
-
Albacore Shuffle
> 24 hourNot quite universal.
-
Danny Ingram
> 24 hourActually... came one day early and was about a 30-minute job to install. I had already planned routing and installed my Lowrance. All that was left was three holes and a nut driver...
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 1.5" Ball Medium Arm Marine Electronic Mount B15-ROM10-RE10 | 1.5" Ball Short Arm Fish Finder Mount B15-ROS10-RE10 | 1.5" Double Ball Mount with Two Round Plates B15-ROM10-RO10 | Fish Finder Mount 1.5" Ball Base for Kayak B15-TS10-RE11RA | 1.5" Ball Fishing Rod Holder with Track Mounting Base B15-CS11-FR10 | 1.5" Ball Fishing Rod Holder with Large Clamp Base B15-TS11-FR10 | |
| Weight Capacity | 4.5 lbs (in motion) / 15.5 lbs (at rest) | 6.6 lbs (in motion) / 15.5 lbs (at rest) | 4.5 lbs (in motion) / 15.5 lbs (at rest) | 2.2lbs (in motion) | 6.6 lbs (in motion) / 15.5 lbs (at rest) | 6.6 lbs (in motion) / 15.5 lbs (at rest) |
| Material | All Marine-Grade Aluminum | All Marine-Grade Aluminum | All Marine-Grade Aluminum | High-Performance Composite | Marine-Grade Aluminum ＆ High-Performance Composite | Marine-Grade Aluminum ＆ High-Performance Composite |
| Ball Size | 1.5" (C Size ) | 1.5" (C Size ) | 1.5" (C Size ) | 1.5" (C Size ) | 1.5" (C Size ) | 1.5" (C Size ) |
| Height of Arm | 5.6" (142mm) | 3.35" (85mm) | 5.6" (142mm) | 3.74" (95mm) | 3.35" (85mm) | 3.35" (85mm) |
| Included Components | Rectangle and Round Plates, Double Socket Arm | Rectangle and Round Plates, Double Socket Arm | Two Round Plates, Double Socket Arm | Universal Mounting Plate, Double Socket Arm, Drill-Down Mounting Track, Transducer Mounting Arm | Universal Rod Holder, Double Socket Arm, Drill-Down Mounting Track | Universal Rod Holder, Double Socket Arm, Large Clamp Base |
| Industrial Applications | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |