Wireless HDMI Transmitter and Receiver Kit, Plug & Play, 2.4/5GHz Stable Streaming to Monitor/Projector/HDTV, Wireless HDMI Extender Kit for Laptop/PC/Camera/Blu-ray

It came on and worked but I could not pair the transmitter with the receiver cause the button on the transmitter. I even took it apart to try to see what was going on. I was really hoping this thing worked but it was a no go. I wouldnt recommend this item cause it appears to be made cheaply.

I really was looking for a way to connect my steam deck/ iPad Pro to the screen without too much hassle and wireless if possible and this does just that. I wasn’t aware of wireless hdmi transmitter and I’ve been recently shocked to see how well they perform. I was able to play my steam deck at 40-60 fps minor minor lags which isn’t something I was expecting. Outputting movies or other Medias, the experience was without any lags and that is what most people would probably use it for. Presentation, medias and other less demanding contents and this does that flawlessly

This works great for just transmitting video and audio. I have to warn you though, do not get this if you want to game with it. The delay will make it almost impossible to play any first person shooter or timing game. On the bright side, it does transmit a beautiful 4K quality video!

This wireless HDMI transmitter/receiver works perfectly for my needs. It includes the receiver unit (the part with the two antennas), the sender (the lollipop shaped device), and a USB power cord for each, as well as a short HDMI cable for the receiver. Using it is incredibly easy. Screw the antennas onto the receiver and point them up, as you see in the photos. Attach to your TV or projector with an HDMI cable. Plug the USB cable into it and the other end into a USB power source. Most TVs and projectors have USB ports, but if yours doesnt, plug it into a USB phone charger. Turn your TV on and select the appropriate input. Youll get an instruction screen. You probably wont need it. The transmitter and receiver are paired at the factory already. Now plug the transmitter into the HDMI port on your computer or whatever device you are using. If the power light comes on, you are good. That means the HDMI port on that device provides enough power to the transmitter. If you dont get a power light, plug the included USB power cord into the transmitter, and the other end into a USB plug. In about 10 seconds, the transmitter will connect to the receiver and your video and sound will be transmitted to the receiver. Done! I have used this approximately 90 feet from my TV and the picture and sound were still perfect. I couldnt get any further away. There is a very slight delay from transmitter to receiver (maybe half a second), so it may not be desirable for gaming. I am super happy with this setup. NOTE: The receiver also has VGA output for connecting to a monitor that does hot have an available HDMI.

My camera server is in another part of the house. The use of this HDMI extender is a great buy. Very little lag and pic quality is high.

This unit works when it wants to. It will be working and then it just loses the signal, it may come back and it might not. Now about 4 months later, when it works which is about half of the time, the signal and sound pause for about 2 seconds every 30 seconds. I can not find anyway to get ANY tech support.

Not quite the miracle I was hoping it would be, but it definitely works. There appears to be some loss in quality / compression although i think thats to accomodate for latency, which there is very little of. Overall, its ok... but I think the technology will only improve from here.

I used this item on a TV box. Great picture quality.

This transmitter description can be a bit confusing at times, Ive seen it listed as handling 4k and then in other places listed at 1080p only. Im using it on a 1080p screen so thats what Ill be covering here. Im a teacher at a school with an overhead projector way up high in the ceiling. They havent run any long hdmi cables through to a wall outlet, only VGA, and I needed to move the computer away from where the VGA outlet was. My solution was to try one of these out so I could leave the receiver on top of the projector and not have to have any messy cable runs down the center of my computer lab. Now, the kind of stuff I use the projector for are videos and still shots and I just use it to duplicate what I see on my monitor. In that circumstance, under those conditions, its pretty handy. Its a little annoying that it cant just be powered over HDMI alone, but both the projector and computer have USB ports, so powering the transmitter and receiver isnt that big of a deal, it just adds another short wire to the mix. The input delay is noticeable so youd never want to use this thing as a primary display method and forget trying to play a real time game or anything with this as your only video output. But for websites, still shots, and video playback it works great and does exactly what I needed it to. Another thing to be aware of is that this device only transmits at 30 frames per second. Its a little pricey for the performance you get out of it, but it definitely solved a problem I had and most of these transmitter/receiver packages are in the same price range of around $80 to $150. This one goes for $130 as do ones with a similar feature set. So, in the end, if you have a very specific need like I did, this could work out well for you. If youre just looking to transmit from one device way across the room to a TV and need it for something like real time interaction with a game, youll want to look for a different solution.

Wanted to connect my Dish HDMI to my TV wirelessly. Followed instructions although whoever wrote them, english was not their first language. I suspect this product is not intended for this use. Did amazon tech support, someone should call me in 7 days. Sorry. Package has no tech support number, cant even find them on the internet as there is no brand on the packaging or instructions. I give them a zero