XIFOWE MK8 Nozzles 24 pcs 3D Printer Brass Nozzles 0.2mm, 0.4mm,0.6mm, 0.8mm, 1.0mm CR-10 Nozzle with DIY Tools and Metal Storage Box for CR-8 / CR-10 / Ender 3 / Ender 3S / 5/6 and so on…

Works great, great value, thanks

Do not use these for a prusa MK3, these nozzles are not actual E3D V6 nozzles. They are missing the dimpling on the outside edge, and are shorter than actual nozzles. Your nozzle will not sit flush against the heatbreak, and you will have nozzle leaks with this product.

I havent used any yet so I cant speak of the quality The .4mm are not all etched as well as the others, the etch is not so deep, but still there. I bought it mostly for the wrench. I hope the nozzles work well. Ill update after I print with some of them.

I am attempting to adjust for the nozzles now but the .4 nozzle is closer to a .6; they are quickly becoming more headache then there worth. Save yourself the stress and spend a few dollars more for higher quality nozzles. The tool included in the kit works great.

The nozzles and wrench work well. The wrench is much easier than the stamped wrenches printers come with. The nozzles are fine quality. The case broke after a few open/close cycles. I printed a new one and moved on.

Estaba teniendo problemas de hilos en todas mis impresiones con PETG, estaba matandome la cabeza pensando que era el filamento o la configuración de impresión, luego de reemplazar la boquilla y usando la misma configuración de impresión el resultado es totalmente diferente prácticamente 0 hilos con PETG. Me hicieron perder mucho tiempo averiguando el problema cuando realmente era de la boquilla.

If you 3d print, youll need some extra nozzles as no matter how good your filament is, youll eventually end up with a jamb, sadly. Bought my printer earlier this year and finally had to change it out, so ordered this nice assortment of nozzles that comes with an angled tool for installation. I was kinda iffy about the tool, but its well made and worked perfectly to take out and replace the new nozzle rather easily, even for a first timer like me. Would suggest you watch a few vids on how to change nozzles but after that, its a quick and easy task to perform. Great way to get a lot of differing sized nozzles to play with, as well as a very useful too. Recommended

This does fit in the screw hole (Thread Size) but the nut size and shaft length are too large

The nozzles seem fine, the wrench is quite nice

Looks great