XiKe 4 Pcs 22333TB (10-10) ID 2.250 x OD 3.376 Trailer Hub Wheel Grease Seals, Fits 5,200, 6,000 and 7,000 lbs Axles/Spindles D42.

Hub/bearing kit I bought had different ID seals than I needed, so these did the trick. Have not had any issues with them. They were properly sized and seem to be of decent quality. One caveat is that unlike the seals in the kit, these do not have a very deep dish to the steel cup part, so its easy to drive them in too far, but they work fine if installed with some care.

Nicely made seals. Fit my landscape trailer perfectly. Very satisfied

Quality item at a fare price.

Good quality good fit I would purchase again and recommend to others

Worked perfectly for my trailer. Do yourself a favor and buy a new set every time you re-pack your bearings. Id buy again if necessary.

This fit well and so far are holding up OK

ID 2.125 x OD 3.376 Trailer Hub Wheel Grease Seals Every spring and fall we make a 5,500 mile trip from Lower Alabama to Montana and back (with side trips through our favorite scenic areas. Before each trip I remove my hubs, inspect the bearings, lube and replace the seals. I have used three sets of these seals thus far and have had no complaints. They are a double seal with spring seat. They also apply a type of sealant on the outside (metal to metal contact area) which seems to work well. I always apply a little wheel grease to the rubber part of the seal. That keeps it from having a dry rubber to metal contact when the wheel starts rolling. Ive been doing this for 49 years and zero failures. For the money, this is a good deal. I would recommend these seals...just make sure YOU are ordering the correct size! Good luck!

Great fit! Seems like a good seal.

I like to keep a stack of these on-hand and repack the bearings on my RV every spring. Good stuff, not that any seal is particularly better than any other, but these worked fine for me.

Product was good quality for the price. Performed as expected. Highly recommend