Zalman I3 NEO Black Edition Airflow ATX Computer Case with Mesh Front Panel, Magnetic Swing-Open Tempered Glass Side Panel, 4X RGB 120mm Fans Pre-Installed, Mid Tower for Gaming or Office Work

The case looks amazing it’s not ARGB but still looks great. I had a problem with the 3 front fans cutting out for a second every 5 seconds but the seller sent out 3 new fans to try and mitigate the problem. It now runs perfectly and I couldn’t have asked for a nicer case. I love how this thing looks. 10/10 would buy again especially because the seller is really helpful and sent out new fans for me.

If youre looking for an inexpensive computer case that does the job, this is it. No nonsense case. It has everything you need. 4 RGB fans already installed. The fans do not have protective covers. Theres room for an AIO water cooler if you want to put one in on the top inside of the case. This case has good channels in the back for cable routing. Installed fan are not addressable. You will not be able to control their color. It still looks very good. You get high speed USB 3.0 and head phone jack on the top of the case. There are 2 magnetic dust cover on top and bottom of the case. Inside the case is as spacious as an ATX case should be. I have a RX 6600 XT GPU install with plenty of room. You need to add standoffs which comes with the case for additional support of your motherboard. I forgot to do this at first and it was ok. The standoffs that are already installed works well but I wanted more support. So dont forget to install the extra standoffs for the motherboard if you like. This is probably my only issue with this case. Case is light and sturdy. It has glass side panel on one side and a solid cover on the other side. Both side panels can be easily removed. The case has rubber feet so it sits slightly off the ground. It does not have support if you want to put it on the side. The fan cables and front panel cables are long enough to connect anywhere on the motherboard. This case also comes with tie down so cables can be secured properly. Overall the case looks good and function well. Ive bought many cases and this one is the best value case so far.

The design and cost.

Probably one of the best cases on the market, highly recommend

This case is a good case for its value, you very well much get what you pay for with this. The reason I give this case a 4* review is bc of the lack of control of the fan colors, this case comes with no fan hub just a splitter to power them and the fans color in the picture is the only color mode they have. I recommend changing out the fans, I changed them out with four Corsair QL120s and it made the case pop while also giving good thermals. Good case overall just swap out the fans and you will be ok if you want control over your rgb!

Cable management is easy, lots of room for a relatively compact case, can fit a 4070ti no problem. Definitely worth the price!

Let me start off with the packaging, this case came in a normal PC case box but what threw me off was that it came with this squishy foam-like material which in my experience was great. Unlike most cases that come in squeaky foam, this one does not break off easily and protects the case very well. Let me start off with the things I like most about this case. 1) The glass is on hinges which is very nice for convenience when switching out parts or even adding a little figure inside the PC. 2) The case comes with four RGB fans that are included so you dont have to buy fans would work perfectly fine with putting one of the front fans on top. 3) This case has a very nice hard drive and SSD tray that you can pull out without having to use any screwdrivers. 4) On the back where it comes with screws, it includes a glass cleaner wipe, USB plugs so dust doesnt accumulate, and extra GPU brackets so if you decide you want to switch out your motherboard it wont have a hole on the back. 5) This case also has a big spot on the top so you can mount bigger or smaller fans. 6) It also has very good airflow because of the mesh front. 7) Has enough space in the front of the PSU and the glass to put a sensor panel if you wanted to add one because I personally have not seen this on another product. The market doesnt have this design leading people to put the sensor panel on top of the PSU shroud or on the back exhaust fan spot. Now for the things I wish this case has. 1) A bigger space to put more hard drives or SSD because even though the spot for the hard drive, there is only one so the max amount of hhd and SSD you could fit is three. One on the back of the motherboard, two on the hard drive case near the PSU, and two in the front but for the ones in the front, those are a bit harder for the cables to reach and the cable management for the cables wouldnt be as pleasant to see. 2) The other thing is that when routing the cables in the back, it was a little difficult because the cutouts are very close to each other so this leave holes and if you have some cables that are not long enough, then youd have to run it up against the holes. Overall, other than these two things that I have listed above, this case is amazing to build and look at and doesnt feel cheap. If you are buying a case/ or looking for a case for your next build consider this one to be one of your top PC cases.

Very happy with this case for my first build. Budget was just right and the components/case manufactured well. Looks awesome as well.

I bought this as it has a superior capacity to take one of the latest HUGE GPU cards. It looks good, well built, reasonably priced and had plenty of space to relocate the innards out of my old case and add the new GPU. Love the light show fans !

Big case for low price