12-Ton 4x7 Inch Heat Press Machine - Pump Sold Seperately

So let me start off by saying this is my 3rd press, my first one was a nug smasher mini which can only press 3.5 material at a time,(paid 800$ for that bundle, waste of money only buy the unit if your looking at nug smasher, and even then another couple hundred and you can get this instead of a 2 ton) so that got old quick when your pressing ounces of material, need to upgrade so decided to go the custom route, got a regular old hydraulic press and some plates..... the plates took literally 30 minutes to get to temp and they didnt stay at temp theyd stay within 10 degrees...said screw it im not paying that much money to deal with that every time so decided to spend the extra 300$ or so dollars for this press and dont think ill ever look back. Pros: gets to temperature within a couple minutes no joke because of the bamboo insulator on both bottom and top plates so ONLY the plates warm up. -the pump is really solid just like the press and has a PSI gauge on it which is a LIFE SAVER when trying to really maximize the quality of your product. -amazing build quality, you can tell itll last for years to come everything is very very thick SOLID very heavy metal CONS: the pump comes separately there is almost no where to put magnets to hold the parchment paper on the top plate, if you dont pin it up itll hang down over where the rosin comes out and you can see whats happening, ive been using the magnets they give you on the alan screw that holds in the top plate... only problem with that is the magnets get SUPER DUPER hot so trying to take the magnet off when its done its very annoying but its literally the only place that you can stick a magnet.

I was very skeptical at first when thinking about purchasing this press. There are not many reviews out there and the videos I looked up of people using this particular model were few and far between, to be honest most of the videos were a disservice to the product in my humble opinion as a few of the gentlemen didnt really seem to know how to use it correctly and seem to be making some pretty bunk product in a few of their videos. While deciding, I contacted the company with a few questions I had, on a weekend evening no less and received a response within the hour. Customer service was stellar by the way, super friendly, and answered all my questions in a very timely manner. After a bit of back and forth with customer service I felt pretty confident in making the purchase. I placed my order on Saturday evening and it arrived Monday afternoon. Once I received my press (and pump, not included) getting it set up was a breeze, very straight forward. The minute I took it out of the box the first thing I noticed was the craftsmanship and quality of the unit. It is really nicely made with top quality materials, smooth and streamlined with no rough edges or cheap components. It most certainly stacks up against the competition of the same type and price point and exceeds, to rival a few of the more expensive competitors units out there. Use is easy and straightforward, plates heat up very quickly so no waiting and the unit functions as it should with no issues. My first press was amazing I used flower to start and was amazed at how well it went and the return, of course that was mostly due to the product going in as it was very frosty flower. I set the temp to 190 degrees and pressed at 1500 psi for 2 minutes. The end result came out amazing and have pressed several batches of flower since and right after that, all in a row with no issues. I have also pressed bubble a few times in this press and so far the returns are amazing (again, credit to product going in) with no issues. Bubble was pressed at 165 and 175 degrees at 1000 and 1500 psi slowly ramping up on pressure. Some pretty tasty stuff! So far the only con I have found with the unit is the magnet placement with the magnets that are built into the machine. Since the frame of the unit is solid aluminum you can not just stick the magnets anywhere on the unit. it does have some magnets built into the frame the top magnets is perfect in the center but the bottom magnet is also in the center which is a tough spot since a lot of the oil streaming down tends to run right right for the spot were the magnet is located. Would have been better to have the whole bottom area magnetized so you can move the magnets as needed. Although for me this not really a con as I dont really use the magnets on the bottom I mostly just fold a crease in the parchment and let the oil roll down in the crease, as I have only used smaller amounts while testing things out this has not been an issue. Over all I would say I was super impressed with the press and glad I made the purchase, I really couldnt be happier with it. As previously mentioned, it will easily go head to head with any other unit of this type and price point all day long and in a few ways the thought and design is better then other units of of the same style. If you are on the fence with making the purchase go for it. You wont be sorry. If you have any questions or need to know any specifics let me know by responding to this review I will do my best to answer any questions and help out in anyway. Thank you DabPress for your help and support while I took my time making my decision on whether to buy the press or not, your customer service is what really swayed my confidence in making a purchase and I am glad I did.

This machine is simply phenomenal. The 10t dabpress is a pleasure on the eyes, easy to use and produces repeatable results with ease. The value for the price paid cannot be beat. The quality of product beat my expectations. Sturdy, strong and doesnt require very much effort to apply significant pressure. I am averaging roughly 20% returns. Here is what I do - Turn on press to heat up platens to 195 Put 2-7g herb into a cylinder mold creating a puck Put puck into press bag (I use 90u) Put bag onto press between parchment paper Slowly depress the plates (15 seconds between presses) I spend about 1-2 mins getting to pressure Let press sit for 2-3 mins with 1200-1500 psi applied Release Collect ooey gooey Dab your fresh flower rosin I seriously cannot recommend this enough. The Dabpress customer service team has provided me with any information I have requested and the pressing is quick and efficient. I would not hesitate to purchase this again and wish I had purchased it sooner! Well done Dabpress.

I love this 12 ton press. It’s absolutely made some top notch rosin for me so far!

The control box does not come on replaced fuse tried again still nothing

Paired this press with a portapower pump, makes nice presses and plate heat temps are accurate. Had an issue with one of the washers coming loose so i emailed customer service. They sent me 4 replacements and some other goodies too.

the drip tech 10 ton works wonderfully! I was quite impressed with the results! I do wish it was designed to tip forward easier without feeling like you have to pick it up and turn it... if you could do it one handed easily that would be quite the improvement. Other than that though honestly great bang for buck!

This product is great. Does as expected and well built quality. This specific product didn’t come with the 10T hydronic pump. Everything else was included and customer service replies very quickly with any questions.

My first unit arrived damaged during shipping but was able to get a replacement very quickly. I would definitely recommend this press to anyone getting into solventless extraction and doesnt want to break the bank. Works great and ideal for personal pressing.

Works great, forgot to convert to ferenheight.