180 Pieces 1 Inch Sanding Disc, GOH DODD Wet Dry Sandpaper with Soft Foam Pad and Backing Pad 1/8 Inch Shank, 60-10000 Variety Grits Grinding Abrasive Sand Paper for Auto Metal Wood Grass Jewelry

Be aware these pads are very small. Yes they work but they wear out FAST Worst of all the rod for Dremel attachment broke! This is due to the poor quality of the metal and the facts that the whole thing is unbalanced. 80% of the time the pads will fly off as the Velcro can barley hold on. I would say they worked good while the rod lasted. Atleast if got my job done. Now I’m stuck with thumb-sized 10k grit sanding pads… Don’t big

Used for wet sanding mineral specimens and have used this in the past. The product is effective and you get along of sanding discs. One disappointment is that unlike my previous purchase, the backing on the sanding sheet separated from the sanding paper which made re-use sometimes impossible. My first purchase of this set didn’t have that problem. Maybe a change in adhesive supplier?

Update! I have had this product for some time now as far as quality they performed well i have used some of each gri they didnt seem to clog up any faster than 3m pads, but they dont last as long, they include a bunch of each item so thats not an issue. Highly recommend... Looks as described havnt used any of the products yet so cant really judge quality or longevity yet but they look and feel as if they ate good quality. Only 4 starts due the fact i have yet to use any of the sanding discs. The entire kit is about the same price as a 5pk of 3m sanding discs.

I liked that it came so fast.

Not bad for first try, but should have used a lower grit to smooth out more before going to a higher/finer grit and this would have eliminated the visible scratches. My photo shows the result with the sanding kit on Amazon (left) compared to the other side of the jewelry that looks very shiny from the resin mold (right). I couldnt get the sanding kit to make it as shiny as the mold even after using a polishing liquid, but its not bad. Again, this was my first try. I actually had to sand down quite a bit of resin that had overflowed the mold, so Im impressed for my first attempt!

To be clear, I am using mine on stone. They work great. I did notice a few small things... All are labeled grit # on back except for 400, just make sure to mark. Also the 400 seems to be cut a bit smaller, not noticeable until you start to use it, it comes right along edge of piece it sticks to, so the velcro on the other piece will scratch the heck out of your project! Also all velcro sanding pads will shift as it turns and is used, exposing opposite velcro, therefore scratching project. Last thing, mind the slight dip in the very middle of all velcro pads, they can create uneven surface on your project. ALL THAT BEING SAID, keep those things in mind when using, but they are overall a great product. They work well. Please excuse all the commas!

This package is well worth every penny compared to most other similar products. The product quality is quite good. After reading all the negative comments of this product, I use a black marker to write down the grit on the back so I can identify later on. This proves to be a life saver once I started using two different polishing/sand tools. I doubt any one can easily find anything else that would match its price/performance ratio.