2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
CHRISTINE
> 24 hourAwesome, easy set up, instructions were detailed enough for this novice. Increased my poor coverage area from two bars to five bars. YAAAAASet up was less than 10 minutes
-
PATRICIA
> 24 hourShipped immediately. Easy set up. Works perfectly as advertised.It was easy for me to set up and works fine
-
ALBERT
> 24 hourWorks perfectly and as promised! Installation was smooth and easy as well. The quick sync off the router did not work but the install through a laptop went through perfectly. My coverage blind spots are now completely resolved. Most important,the device has been powered up for several months now and hasnt once lost the router connection. Great buy!!
-
Pascal R.
> 24 hourProdukt und Händler sehr gut. Irgendwie muss ich nun noch 17 Wörter voll kriegen. Ich hätte nicht gedacht, das es so schwierig ist ;-)
-
Grigory Gofman
> 24 hourI originally bought this to stream videos and music, which the description says it is meant for.Its only 2 hours in but Im very happy with this purchase. Used chrome on my phone to set up and couldnt be easier. Working exactly as I hoped and removed the basement deadzone! I would suggest going up if you are planning to stream.
-
Thorsten Schepp
> 24 hourIch wählte das schwarze LAN-Kabel, da es im Wohnzimmer zusammen mit meinen schwarzen Lautsprecherleitungen verlegt werden sollte und eine graue Leitung die Optik stören würde.
-
D. Mauersberger
> 24 hourHabe es nun schon 3x bestellt und immer das abgebildete Kabel erhalten (Verkäufer: lets-sell!) und bin voll zufrieden, macht was es soll für den Privatgebrauch vollkommen ausreichend und das bei nem unschlagbaren Preis wenns im Angebot ist (2,75€ für 10m)
-
noxxic
> 24 hourDie Kabel machen was sie sollen und wenn man die Kabel in Kurven die Treppe runter verlegt werden die Daten schneller durch die Fliehkräfte ;)
-
Bernd Krolow
> 24 hourSuper
-
Neva Rolfson
> 24 hourThis product sucks and there is little to no support out there - stay away at all costs!
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
