2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
CHRISTINE
> 3 daySetup was a breeze...10min max.The South end of the house is back to max bars.Good product.Great improvement in WIFI in my house - glad I bought it. Easy to set up.
-
Jan H
> 3 dayAlles super
-
JEREMY
> 3 dayI had a Smart TV that had poor connection. As the distance between the two is over 80ft. I bought it and used as directed. The result was a good wifi connection for the TV.The setup is as easy as it could be, clear step-by-step instructions.
-
JERRY
> 3 dayThe range extender worked perfectly for two months and then it had a glitch. Contacted and their whole service department was very helpful and got my extender working again. Highly recommend
-
ALBERT
> 3 dayDont hesitate if you have an issue not getting good reception. This solved all problems and even takes me out under the gazebo with a strong signal.I have three level house so lots of opportunities to lose signal strength. Great investment, I hate I waited so long to buy it. Wonderful investment.
-
CHRISTINE
> 3 dayIt finally works. My Wifi is at full bars, 100%. Works great, wanted to extend range to cover a workshop in the garage which is the furthest point from the router. Placed this about halfway and the whole property gets great coverage Just make sure that you follow the instructions. I skipped a step and the range extender was not working. I had to go back and re set up the range extender. Now its perfect. Everyone in the house can see a difference.
-
Frederic Magnus
> 3 dayDas Kabel ist stabil, erfüllt die neuesten Richtlinien und damit genau den Zweck wofür ich es gekauft habe. Die Verpckung war in Ordnung, die Lieferung erfolgte innerhalb der angegebenen Zeit. Ich bin zufrieden
-
JERRY
> 3 dayExcellent product. I am getting wifi in all the dead zones now in my home. Great buy for $20.Works perfectly so far! Easy as 1,2,3! Great technology. No stress at all.
-
Kalem
> 3 daySehr robust
-
hans61
> 3 dayPrima product
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
