2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
Ramona B.
> 3 dayFunktioniert alles einwandfrei
-
SANDRA
> 3 dayI have a network printer on a higher level then my router and the connection went from poor to excellent after placing the extender on the floor between the router and printer.
-
JERRY
> 3 dayExcellent product. Truly extends our wifi throughout our long apartment. Highly recommended.Worked perfectly, and established a very strong network, no more wifi drops
-
JL
> 3 dayDas BIGtec 10 Meter Gigabite Ethernet- Kabel ist gut verarbeitet und es macht, was es soll zwischen Rooter und SmartTV.
-
MARGARET
> 3 dayThis wifi extender does the job! I was hoping for a little more distance and ability to turn corners and go through walls, but its 90% what I was hoping. Has already paid for itself by reducing my data usage!
-
JERRY
> 3 daythis wifi Repeater works great in our 5,000 foot house!!! just needed to buy 4 and not just 1.My 14 year old cud set it up in 5 min. Excellent coverage from 30 feet away
-
Mathis
> 3 dayDas Kabel (1×10m, Schwarz) kam zügig am übernächsten Tag an. Es ist qualitativ in Ordnung, allerdings sehr dünn. Auch ist die Verarbeitung (hauptsächlich am Stecker) nicht wirklich überragend, was man für den Preis aber auf keinen Fall erwartet. Man sollte es nicht in der Nähe von Stromkabeln verlegen da es NICHT abgeschirmt ist. Für meinen SmartTV ist es Perfekt. Für den Preis wirklich gut!
-
PATRICIA
> 3 dayEasy to setup and worked beyond my expectations. Setup only took 10 minutes and the instructions were well written. Great purchase
-
Daniel
Greater than one weekSuper Kabel, wie auf dem Bild abgebildet, gute Datenübertragungsrate und das Kabel ist flexibel genug um auch gut genug um Ecken legen zu können, der Abbruchschutz ist eine nettes und nützliches Zusatzfeature
-
ALBERT
> 3 dayCouldnt be happier, works as expected and the easy setup I enjoyed the most totally made it easier to use. Thank you again, and already recommending to friends and family.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
