2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
Christine Roggenkamp
> 3 dayIch habe das Netzwerkkabel freitags bestellt und schon am Montag darauf erhalten. Ich bin sehr zufrieden mit dem Ablauf und dem Produkt
-
JERRY
> 3 dayGood probuct has the ethernet pirt that i use with an ethernet splitter to system link xboxesThis is a very good product. I was really surprise at how great it worked.
-
LeThi Oelsner
> 3 dayFür das Preisleistungsverhältnis ein super Kabel. Funktioniert 1a, habe nichts auszusetzen.
-
JOYCE
> 3 dayTrivial to setup if your router supports WPS. It did get stupid once so I had to unplug it and plug it back in but thats just typical of any consumer grade networking product.
-
MARGARET
> 3 dayIn a neverending battle over wifi signal with my neighbors. This thing gives me enough boost to win. I have already recommended it to my friends, and I totally recommend it to you.
-
Marianne Neumair
> 3 dayAlles passt wie es sein soll
-
Grigory Gofman
> 3 dayVery impressed with it. My new extender would connect to my router, everything seem to work. Im very happy with the extender and the tech support.
-
KEITH
Greater than one weekLove this extender. It is so pretty easy to just unplug and move. All you do is plug it in when you move it and it boots up in maybe a minute and is ready to go. My house is about 3300 square feet and we own 2 of these and they are great.
-
MARY
> 3 dayEasy set up and works great in my house. I bought two of them to cover my entire property, just under 1/4 acre. No more dead spots.
-
ALBERT
> 3 dayUsed this to extend the range of a Comcast wireless router. Setup is easy but it assumes your internal network is using 192. Some may need to go in and do some extra configuration for it to work on their network.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
