2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
REBECCA
> 3 dayGood Product , Easy configuration & make sure you are close to the main router box as this help you in a faster configuration with less delay signal time .
-
BENJAMIN
> 3 dayI was looking for something quick and easy to boost my wifi because my bedroom was a dead zone. This was cheap but it works great.
-
KEITH
> 3 daygave my wife on the other side of the house much stronger signal. easier connection to wi fidoes what it is supposed to and super easy setup took less than 5 minutes
-
JERRY
> 3 dayThis product works well. It was simple to connect. I have a large house and plugged it in around the middle of the house, so i have wifi everywhere now
-
PATRICIA
> 3 daySeems to get service interruption quite frequently, but when it does work, it does a great job of extending our wifi coverage throughout the rest of our tiny house. Really best pretty easy to install . I watch Netflix with no laggs but it laggs on my Playstation 4 is ok though it works with my Netflix really great .
-
BENJAMIN
20-11-2024My modem does not have a WPS button! But the setup online its easy too! You go to this link and you find your network and thats all!
-
Pseudonym
> 3 dayAlles top
-
PATRICIA
> 3 dayVery good product.. working without any distributionHave it for over a month no problems... Definitely canrecommend to anybody...
-
REBECCA
> 3 dayThe extender that I had purchased works extremely well. I was having trouble logging into Netflix on my smart TV because my router was located in a different part of my house. Once I got Ac750 up and running I have had no problems logging on to Netflix on my smart TV. DB
-
funstone
> 3 dayDas Kabel funktioniert einwandfrei, selbst nach fummeliger Montage durch einen Rohrkanal mit nachziehen und Ecken. So jetzt noch die verlangten Wörter. Kurz und prägnant geht wohl nicht.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
