2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
MARGARET
> 3 dayI was able to install it in about 10 min and i now have wifi throughout the backyard.If you are looking for a easy to install wifi extender. this will work.
-
JERRY
> 3 dayThis was the perfect device.A little difficult to configure, but the device works great with no issues. There was one Firmware update. Tech support for the product is superior I kept losing single in the back bedrooms. This extender worked right out of the box and I have strong signals everywhere
-
BENJAMIN
> 3 dayI actually have this thing in my shop 500 feet from house works great. I just bought a second one such a good deal, easy to setup.
-
Erwin Lemke
Greater than one weekArtikel wie beschrieben,die Qualität der Ware ist gut,die Ware war schnell bei mir.Ich konnte die Sendung per Sendungsnachweis verfolgen.
-
PATRICIA
> 3 dayVery good product.. working without any distributionHave it for over a month no problems... Definitely canrecommend to anybody...
-
Kravie
> 3 daySehr wertiges Kabel. Toll ist auch der Gummischutz ueber der Entriegelung.
-
qttggw
Greater than one weekThis Wi-Fi Range Extender was easy to set up. I just plugged it into an electric outlet, waited for it to turn green, pressed the WPS button on my router and on the extender and waited for another green light.
-
MARY
Greater than one weekIt took a little bit of fiddling to get it going, but it was worth it. I had purchased a modem instead of paying Comcast every month. I had an older TPLink router , and I was not able stream in my bedroom. After setting up the ranger extender, everything is fine. Glad I purchased this item.
-
CHRISTINE
> 3 daySimple set up, even without being able to do the one-button thing. Works great, strong signal.Extremely easy setup. Great range, even through the walls to the back yard.
-
JERRY
> 3 dayExcellent product. I am getting wifi in all the dead zones now in my home. Great buy for $20.Works perfectly so far! Easy as 1,2,3! Great technology. No stress at all.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
